- Adds 15 W of isolated X2X Link power to an X67 station
- Supports parallel and redundant supply arrangements
- Protects the output against short circuit and overload
X67PS1300 is a B&R galvanically isolated x2x link power supply module designed for the X67 System.
The module introduces additional isolated X2X Link power into a distributed X67 station when the bus power budget requires reinforcement or redundancy.
Before installation or replacement, verify the complete material number, the X2X station power calculation, 24 VDC input quality, equal input voltages for redundancy, M8 and B-coded M12 pinouts, parallel wiring, 0.75 A limit and sealed connector condition.
Availability, condition, price, and shipping time for X67PS1300 are confirmed during quotation.
B&R X67PS1300 Galvanically Isolated X2X Link Power Supply Module Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- The 24 VDC input is galvanically isolated from the X2X power output
- The documented insulation test level is 500 Veff
- Station grounding and field references still require the system wiring plan
- Parallel operation is supported
- Redundant operation requires equal input voltages
- Independent source protection and common return arrangements must follow the station design
- The module provides 15 W at 20 VDC
- Connected X67 and X2X modules must remain within the 0.75 A output limit
- Cable and connector losses should be included in the remote-station calculation
- Reinforcing X2X Link power in extended X67 stations
- Creating redundant X2X Link power for distributed machine I/O
- Supplying isolated bus power to remote X67 module groups