Features:
- Combines eight-channel analog-input electronics with the matching current PMOD.
- Converts 4–20 mA field signals with documented 14-bit resolution.
- Provides the exact G01-to-G01 paired configuration for Ovation service.
The current ordering configuration is
1C31224G01 + 1C31227G01, the Ovation 8-Channel 4–20 mA Analog Input Electronics and Personality Module Pair documented for Ovation I/O paired assembly.
In the intended system role, the electronics converts field current to fourteen-bit digital values for Ovation control and monitoring, while the personality module provides the matched current-input interface.
For selection and commissioning, confirm loop power, polarity, transmitter grounding, base wiring and channel database scaling before installation. Calibrate the complete loop rather than only the electronics module.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson 1C31224G01 + 1C31227G01:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Acquires transmitter current signals for process monitoring and control, for its documented operating duty.
- Digitizes eight current loops for Ovation controller calculations, through the intended receiving-system interface.
- Supports exact paired maintenance of a documented traditional I/O position, in the configured and commissioned installation.
- Field power is isolated before the current PMOD or electronics module is removed, under the site's controlled work procedure.
- Hazardous-location acceptance depends on the transmitter, barrier and enclosure design, for the complete installed loop or enclosure.
- Loop checks follow the site's calibrated test and permit procedure, before the system is released for operation.
- The paired assembly operates within the cabinet limits specified for Ovation traditional I/O, under the stated mounting or enclosure conditions.
- Clean connector surfaces and controlled humidity protect low-level current measurements, throughout the commissioned installation.
- Transport uses ESD-safe packaging and avoids condensation before energization, as part of the site's environmental assessment.
- Fourteen-bit conversion supports the documented analog measurement resolution, within the documented conversion or output architecture.
- Eight channels share the module while retaining individual database scaling, while each configured channel retains its assigned function.
- Loop performance is confirmed across the calibrated current span at commissioning, without adding unverified hardware or signal paths.