Features:
- 330104-00-15-50-12-00 combines M10x1 metric thread with full armor and FluidLoc oil-blocking cable technology.
- Zero unthreaded length paired with 150mm case satisfies 20mm differential rule for metric mounting configurations.
- Flexible stainless steel armor and TipLoc molding deliver rugged durability for harsh industrial machinery environments.
The 330104-00-15-50-12-00 offers dual protection for demanding industrial applications. The flexible AISI 302 stainless steel armor surrounds the cable, providing exceptional resistance to crushing, abrasion, cutting, and impact damage. This armor is especially valuable when cables are routed through cable trays with other heavy cables, near sharp metal edges, or in areas with foot traffic. Complementing the armor, the FluidLoc cable technology seals the cable interior, preventing oil and other industrial fluids from migrating through the conductor bundles and leaking out at termination points.
The 330104-00-15-50-12-00 features M10 x 1 metric threading, making it suitable for installations outside North America where metric standards prevail. The zero unthreaded length (00) means threads begin immediately at the probe tip, with no smooth cylindrical section before threading begins. The overall case length of 150 mm (15 × 10 mm increments) provides substantial probe body length for deeper mounting holes. This configuration satisfies the critical metric design rule requiring unthreaded length to be at least 20 mm less than case length (0 mm ≤ 150 mm - 20 mm = 130 mm).
The 330104-00-15-50-12-00 has a total length of 5.0 meters (50), designed exclusively for use with 5-meter Proximitor sensors (330180-50 panel mount, 330180-51 DIN mount, or 330180-52 no mounting hardware). The 5-meter configuration is the most common system length in the 3300 XL family, balancing installation flexibility with signal integrity. Agency approval option 00 means this probe carries no hazardous area certifications, making it suitable for general industrial environments where explosive atmospheres are not present.
The 330104-00-15-50-12-00 Bently Nevada Proximity Probe may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330104-00-15-50-12-00 Proximity Probe Manuals,
Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
Bently Nevada 330104-00-15-50-12-00 Proximity Probe Specs
General
- Manufacturer GE / Bently Nevada
- Model 330104-00-15-50-12-00
- Condition New Original ready stock
- Product Family
330104-00-15-50-12-05,330104-00-15-50-12-CN,330104-00-15-50-12-RU
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
- Radial Vibration Measurement: Installed in an X-Y orthogonal pair over fluid-film bearings to measure dynamic shaft orbital motion and radial displacement.
- Thrust (Axial Position) Monitoring: Monitors the axial float of turbine or compressor rotors, acting as a critical barrier against physical contact between rotating components and stationary casings.
- Keyphasor / Speed Reference*: Detects machine keyways, notches, or protrusions to output a once-per-turn reference pulse, which is necessary for phase angle tracking and dynamic balancing.
- "Not OK" Circuit Monitoring: The companion monitor continuously checks the integrity of the probe loop (tip coil, cable, and connectors). If a cable snaps, a connector becomes loose, or a short circuit occurs, the system instantly flags a "Not OK" fault condition.
- Interlock False-Trip Prevention: When a "Not OK" diagnostics alarm is active, the system automatically inhibits any emergency machine shutdown (Trip) commands associated with that channel. This ensures that a failed sensor does not trigger an accidental, expensive factory shutdown.
- System 1 Advanced Asset Condition Monitoring*: Dynamic waveform data captured by the probe is uploaded to Bently Nevada's System 1 software for real-time diagnostic plots, including frequency spectrums, cascade plots, and shaft centerlines to identify machine misalignment, unbalance, or bearing wear.
- Mechanical Centering (Physical Gapping): The 3300 XL 8mm system features a standard 2.0 mm (80 mils) linear range. During mechanical installation, the probe must be threaded into the casing until its tip is positioned precisely at the midpoint of the linear range: 1.27 mm away from the target surface.
- Electrical Verification: With the machine at rest and the probe gapped at 1.27 mm, verify that the DC voltage output across the Proximitor OUT and COM terminals reads exactly -10.0 Vdc. The system relies on a calibrated scale factor of 7.87 V/mm (200 mV/mil) against standard AISI 4140 steel.
- System Modernization & Upgrades: Since the 330104 probe has a 5.0-meter cable length, it must be strictly paired with a 5-meter Proximitor Sensor (e.g., 330100-50-XX) and a 5-meter extension cable (if applicable) to maintain the 7.87 V/mm scale factor. When upgrading legacy system monitors to the current Bently Nevada Orbit 60 platform, the existing 330104 field probe can be completely preserved—only the host monitor parameters need to be reconfigured.