Features:
- 8.5-meter length with stainless steel armor for long runs and mechanical protection.
- Built-in FluidLoc technology prevents oil migration through the cable interior without field sealing.
- Patented TipLoc and CableLoc technologies provide 330 N pull strength and robust tip bonding.
The 330130-085-11-05 spans 8.5 meters between probe and Proximitor sensor. This extended length allows the monitoring electronics to be placed in a control cabinet far from the measurement point. The stainless steel armor protects the cable during the long run, resisting crushing from conduit fittings and abrasion from cable tray edges. For large machinery installations where the Proximitor sensor must be remote, this armored cable delivers reliable signal transmission without fear of mechanical damage.
Unlike standard cables that require field-applied sealing compounds, the 330130-085-11-05 has FluidLoc technology factory-installed. An internal barrier runs the full length of the cable, stopping oil from wicking through the interior and leaking at the machine penetration point. This is essential for lubricated machinery such as turbines, compressors, and gearboxes. No silicone tape, no heat-shrink, no periodic re-application—just reliable fluid containment for the life of the installation.
TipLoc molding bonds the probe tip to the body, preventing separation under vibration. CableLoc provides 330 N pull strength, keeping the cable attached even during rough pulls. These patented features are critical for long cable runs where installation stress is higher. The gold-plated ClickLoc connector locks with finger-tight torque, staying secure without tools. For facilities running cables through conduit or exposed to mechanical stress, the 330130-085-11-05 provides the mechanical robustness needed for long-term reliability.
The 330130-085-11-05 Bently Nevada Extension Cable may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330130-085-11-05 Extension Cable Manuals,
Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
Bently Nevada 330130-085-11-05 Extension Cable Specs
General
- Manufacturer GE / Bently Nevada
- Model 330130-085-11-05
- Condition New Original ready stock
- Product Family
330130-040-11-05,330130-045-11-05,330130-085-03-05
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
- Remote Signal Interception: Suitable for large machinery (such as large steam turbines and hydroelectric generators) where the probe installation location is far from the proximitor housing.
- High-Risk Damage Areas: Installed in open areas susceptible to trampling, tool impacts, or mechanical abrasion; the stainless steel armor provides extremely strong tensile and compressive protection.
- Hazardous Environments: Suitable for environments containing explosive gases, such as oil refineries, chemical plants, and natural gas processing stations.
- Chemical Resistance: The outer FEP material and stainless steel armor resist immersion and corrosion from most industrial solvents, acids, alkalis, and lubricants.
- Moisture and Sealing: Combined with the "connector protection sleeve," it effectively prevents condensation or oil from seeping into the connector, maintaining stable electrical connections.
- Length Matching: This model has a length of 4.5 meters (45). Ensure that the probe length + extension cable length = the total system length specified by the preamplifier (typically 5.0 or 9.0 meters), otherwise measurement errors will occur.
- Connector Insulation: Use connector protectors during installation to prevent the connectors from contacting the housing ground, which could cause grounding loop interference.