Features:
- Basic AC500-eCo V3 CPU with integrated Ethernet.
- Six digital inputs and four transistor outputs onboard.
- One option-board slot for supported extensions.
PM5012-T-ETH 1SAP122600R0072 combines controller execution, Ethernet, and compact local I/O in one processor module.
The onboard channel count supports smaller machine-control tasks without a separate local expansion rack.
Engineering records should keep the firmware, network, I/O, and option-board definitions synchronized with the installed hardware.
For installed systems beyond OEM end-of-life, ABB PM5012-T-ETH 1SAP122600R0072 Processor Module may remain available for purchase and support from Apter Power.
ABB PM5012-T-ETH 1SAP122600R0072 Processor Module Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
PM5012-T-ETH 1SAP122600R0072 integrated interfaces
- Ethernet: One integrated interface supports engineering and controller communication for the configured application.
- Inputs: Six 24 V DC digital inputs provide local machine-state acquisition.
- Outputs: Four 24 V DC transistor outputs switch documented control loads through one output group.
- Output supply: The transistor group uses the specified external 24 V DC process supply and common reference for connected loads.
PM5012-T-ETH 1SAP122600R0072 project configuration
- Hardware target: Automation Builder must use the exact CPU order code, firmware level, and option-board definition.
- I/O mapping: Onboard channel addresses and process tags should match the terminal schedule and application logic.
- Network record: Preserve IP settings, switch connections, controller role, and device bindings before service work.
- Retained data: The project should identify which variables and application data must be preserved through power cycles and controller replacement.
PM5012-T-ETH 1SAP122600R0072 revision migration
- Replacement code: ABB replaces revision-zero order code R0072 with revision-one order code R0172.
- Engineering level: Existing projects must use Automation Builder 2.6 or higher for revision-one hardware.
- Firmware floor: Revision-one CPUs require V3.6.x or later and cannot be downgraded below the stated level.
- Functional continuity: Revision one retains the basic PM5012-T-ETH features while introducing the updated hardware and firmware baseline.
Supported projects for PM5012-T-ETH 1SAP122600R0072
- Compact machines: PM5012-T-ETH 1SAP122600R0072 can execute small machine sequences using its onboard digital inputs and transistor outputs.
- Packaged equipment: PM5012-T-ETH 1SAP122600R0072 can combine local control with Ethernet exchange to a supervisory or peer system.
- Panel modernization: PM5012-T-ETH 1SAP122600R0072 can maintain an existing AC500-eCo V3 application when firmware, option-board, and project compatibility are preserved.
- Standalone units: PM5012-T-ETH 1SAP122600R0072 can coordinate self-contained equipment where onboard I/O handles local signals and Ethernet carries plant-level data.