Features:
- Extended-reach non-contact probe for deep bearing housings and thick machine casings
- 96 mm case length with 0.5 m integral cable and miniature coaxial connector
- Rugged 3/8-24 UNF mounting thread compatible with 7200 series monitoring platforms
The Bently Nevada 83607-00-96-05-02 Proximity Probe serves as the extended non-contact sensing interface between the rotating shaft surface and the 7200 series monitoring system. It continuously converts mechanical shaft displacement and vibration into regulated electrical signals through eddy current technology, supporting steady-state operation of machinery protection and condition monitoring modules in deep-reach installations.
The Bently Nevada 83607-00-96-05-02 Proximity Probe provides essential sensing functions critical to the entire measurement path, directly affecting the proper, normal operation of the overall vibration monitoring system. One probe is required per measurement point, and it must be securely threaded into the mounting location to maintain precise standoff distance from the metallic shaft surface. The Bently Nevada 83607-00-96-05-02 Proximity Probe is always positioned at the bearing housing or machine case to capture radial vibration, axial displacement, or Keyphasor timing data on large or heavily enclosed equipment.
For complete eddy current measurement applications, the monitoring system requires the Bently Nevada 83607-00-96-05-02 Proximity Probe to be paired with a compatible 7200 series extension cable and Proximitor signal conditioner. In addition to standard probe operation, this configuration performs automatic signal conditioning. The measurement system executes signal processing using the internal circuitry specified in the Proximitor unit. Using this method, the system continually monitors the health of the probe-to-target gap.
The 83607-00-96-05-02 Bently Nevada Eddy Current Proximity Probe may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 83607-00-96-05-02 Eddy Current Proximity Probe Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 83607-00-96-05-02 Eddy Current Proximity Probe Specs
General
- Manufacturer Bently Nevada
- Model 83607-00-96-05-02
- Condition New Original ready stock
- Product Family 83607-00-48-05-02,83607-00-75-05-02
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Shaft Radial Vibration: Monitors real-time fluid-film bearing movements.
- Axial Thrust Positioning: Prevents catastrophic internal component contact.
- Phase & Speed Sensing: Supplies critical timing pulses to system modules.
- Rod Drop Analysis: Tracks wear on reciprocating compressor bands.
- Operating Temperatures: Rated from -52°C to +177°C (-62°F to +351°F).
- Atmospheric Durability: Sealed to withstand 100% condensing humidity levels.
- Chemical Immunity: Uses stainless steel and PPS tips against oils.
- Hazard Class Options: Rated for Zone 0/1/2 via ATEX/IECEx/CSA.
- System Integration: Connects via a 9.6-inch unthreaded sleeve length.
- Physical Coupling: Links to extension cables via coaxial connectors.
- Raw Transducer Output: Sends raw gap voltage to a Proximitor.
- Rack Panel Delivery: Feeds directly into a 3500 Series Monitor system.