Features:
- CE4003S2B10 provides 16 documented channel capacity for this 16-channel four-wire 4-20 mA HART analog input assembly.
- CE4003S2B10 supports HART digital communication for this 16-channel four-wire 4-20 mA HART analog input assembly.
- Series 2 Plus is the documented card generation for CE4003S2B10 as this 16-channel four-wire 4-20 mA HART analog input assembly.
The current ordering configuration is CE4003S2B10, the DeltaV M-series 16-Channel 4-Wire 4-20 mA HART Analog Input Assembly identified for the DeltaV M-series Traditional I/O.
CE4003S2B10 performs the documented 16-channel four-wire 4-20 mA HART analog input assembly function within the DeltaV M-series Traditional I/O architecture. Its operation follows the capabilities and limits assigned to this exact ordering configuration.
Before commissioning, retain the full CE ordering code, match four-wire terminal hardware, and verify loop power and HART device setup.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson CE4003S2B10:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Acquire 16 four-wire 4-20 mA transmitter signals through an M-series Series 2 Plus analog input assembly.
- Access HART digital information from compatible four-wire field transmitters while reading their analog process values.
- Connect high-density four-wire analog input loops through the matched Series 2 Plus card and terminal hardware.
- Configure CE4003S2B10 only with the protocol and interface parameters documented for its 16-channel four-wire 4-20 mA HART analog input assembly.
- CE4003S2B10 handles 4-20 mA analog input as the documented signal for this 16-channel four-wire 4-20 mA HART analog input assembly.
- Verify loop power and HART device setup before placing CE4003S2B10 in service.
- Match CE4003S2B10 to the exact carrier, terminal, and I/O hardware documented for its DeltaV M-series Traditional I/O installation.
- DeltaV M-series is the product series associated with CE4003S2B10 and its 16-channel four-wire 4-20 mA HART analog input assembly.
- Check the complete ordering code and hardware revision before replacing CE4003S2B10 with a similar assembly.
- 4-wire transmitters is the documented field wiring for CE4003S2B10 as this 16-channel four-wire 4-20 mA HART analog input assembly.
- Install CE4003S2B10 only with the carrier, terminal, and field-wiring components documented for this 16-channel four-wire 4-20 mA HART analog input assembly.
- For CE4003S2B10 in DeltaV M-series Traditional I/O, verify keying, circuit ratings, matched field hardware, and power isolation before connection.