Features:
- Device-level network bridge: Connects DeltaV control data to a shared DeviceNet trunk instead of separate point wiring.
- Layered fault isolation: LocalBus, card, network power and individual nodes can be assessed as distinct service boundaries.
- Configuration-preserving service: D5 keying and a recorded trunk map help keep the replacement aligned with the installed network.
KJ3244X1-BK1 is the S-series interface between DeltaV and an installed DeviceNet device-level network.
The card manages communication through a documented trunk while the network supply powers the field-side bus and connected nodes.
Reliable service depends on retaining both the physical topology and DeltaV communication configuration, so card exchange is followed by node and data-path validation rather than a power-only check.
Apter Power can help confirm the D5 termination, DeviceNet topology and S-series fit for the Emerson KJ3244X1-BK1 DeltaV S-series DeviceNet Interface Card before quotation.
Emerson KJ3244X1-BK1 DeltaV S-series DeviceNet Interface Card Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Shared trunk: Multiple supported nodes communicate through one engineered device-level network.
- Control handoff: DeltaV output data reaches configured nodes while input and status data return through the same interface.
- Node identity: Every device address must remain unique and mapped to the intended control function.
- Communication boundary: A working card cannot compensate for an unpowered, miswired or misconfigured trunk.
- Separate domains: The S-series LocalBus and DeviceNet field network have independent power checks.
- D5 terminal relationship: The terminal key helps preserve the correct electrical interface at the installed position.
- Trunk integrity: Polarity, shield, termination and branch wiring are verified against the recorded topology.
- Load awareness: Device power and cable drop are evaluated across the complete network rather than at the card only.
- Configuration capture: Node list, addresses and exchanged data are recorded before the old card is removed.
- Identity verification: Full model and terminal key are checked at receiving and again at the cabinet.
- Progressive proof: Card recognition precedes network scan, node recovery and control-point validation.
- Fault containment: A missing node is investigated on its branch before the complete interface is rejected.
- Motor-control integration: Exchanges commands and status with supported networked starters or drives.
- Packaged equipment networks: Connects a documented DeviceNet skid interface to DeltaV.
- Brownfield network repair: Restores an identified S-series gateway while verified trunk wiring is retained.
- Maintenance diagnostics: Provides a defined point for separating DeltaV, trunk and node faults.