Features:
- Provides a regulated 24 VDC output for industrial control loads.
- Delivers a documented continuous output rating of 20 A.
- Corresponds to the SDN 20-24-100C-EPM DIN-rail supply.
The current ordering configuration is 1X01047H01L1, mapped by Emerson to the SDN 20-24-100C-EPM 20 A supply.
It converts universal AC mains power to the 24 VDC group-power level used by compatible control-system assemblies.
Before installation, calculate the complete DC load and verify feeder protection, conductor capacity, rail mounting, ventilation and terminal torque.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson 1X01047H01L1:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Provides 20 A of regulated 24 VDC group power in compatible control cabinets.
- Supports higher-current DIN-rail DC distribution for industrial automation loads.
- Replaces an installed SDN 20-24-100C-EPM supply after full electrical verification.
- The continuous output rating is 24 VDC at 20 A.
- The input circuit accepts the documented 100-240 VAC range.
- Thermal and conductor sizing must reflect the higher output capacity of the 20 A configuration.
- Disconnect and lock out the AC feeder before servicing the power supply.
- Protect the input and output conductors according to the installed current and local code.
- Verify polarity and terminal torque before energizing downstream control equipment.
- Install the supply inside the cabinet environment specified for the complete control system.
- Preserve required rail clearances so heat can leave the 20 A unit.
- Confirm that ambient temperature and load derating remain within the power-supply data sheet.