Features:
- LS discrete-input role: The module marking identifies the LS DI function.
- 24 VDC dry-contact signal: The input type is printed directly on the unit.
- Exact order identity: KL3003X1-LS1 is paired with P/N 12P6539X062 and REV H.
KL3003X1-LS1 establishes the LS discrete-input function before a channel is assigned or a replacement is ordered.
The 24 VDC dry-contact wording distinguishes the required field-signal type from other CHARM functions.
The exact model, manufacturer part number and revision marking form the receiving identity for the labeled module.
For Emerson KL3003X1-LS1 LS DI 24 VDC Dry Contact CHARM documentation, quotation and procurement support, Apter Power can help review the complete model and P/N 12P6539X062.
Emerson KL3003X1-LS1 LS DI 24 VDC Dry Contact CHARM Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Channel role: LS DI makes KL3003X1-LS1 a discrete-input selection rather than an analog or output CHARM.
- Signal match: Assign it only where the channel design calls for the marked 24 VDC dry-contact input function.
- Powered-signal boundary: Do not use the dry-contact identity as approval for a powered voltage-output signal.
- Suffix control: A similar CHARM housing or another LS suffix does not establish the same field-signal role.
- Identity pair: Require KL3003X1-LS1 together with P/N 12P6539X062 to control the exact module received.
- Function wording: LS DI 24 VDC DRY CONTACT must agree with the requested channel role before the item is released for use.
- Revision record: Keep REV H as a separate receiving and service detail without adding it to the product model.
- Mismatch action: Hold any unit whose model, part number or function wording differs instead of accepting it by appearance.
- Function first: Confirm the planned point is the marked 24 VDC dry-contact input before assigning conductors to this CHARM.
- Terminal source: Use the exact installation instructions for terminal assignments because the item marking does not provide a wiring diagram.
- Connection stop: Do not land field wiring when the required terminal detail for KL3003X1-LS1 has not been established.
- Adjacent-model boundary: Never borrow a terminal arrangement or rating from another LS CHARM type or suffix.
- Dry-contact input points: Apply the module to the marked 24 VDC dry-contact signal function.
- LS DI channel service: Use it where the installed design specifies the LS discrete-input role.
- Exact module replacement: Match installed KL3003X1-LS1 and P/N 12P6539X062 records.
- Revision-controlled maintenance: Retain REV H as an item-level service and receiving detail.