- Treat A6370D as an AMS 6300 SIS protection channel
- Match the configured sensor input to the installed speed pickup
- Control proof testing and bypasses through the site safety procedure
Emerson A6370D is a single-channel speed monitor with display used in the AMS 6300 SIS digital overspeed protection system.
Three monitors operate with an A6371 backplane to implement the approved voted or non-voted trip architecture while accepting eddy-current, Hall or magnetic speed sensors.
Before replacement, save the complete monitor configuration, bus address, trigger levels, sensor type, voting/backplane setting, trip limits, relay logic, bypass state and proof-test records.
Availability, condition, price, and shipping time for A6370D are confirmed during quotation.
Emerson A6370D Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Select eddy-current, Hall or magnetic/VR mode correctly
- Place trigger thresholds within the measured signal limits
- Verify reference, shield and ground paths for the floating input
- Match the saved configuration to A6371/00 or A6371/10
- Preserve relay latching, direction and voting assignments
- Confirm each monitor position against the approved safety design
- Use documented test values and controlled bypass authorization
- Verify every trip relay and reset path
- Record configuration checksum, results and return-to-service status
- SIL-rated turbine overspeed protection
- Direction and speed protection on critical rotating machinery
- Three-channel voted or non-voted shutdown systems using AMS 6300 SIS