Features:
- Delivers 100 W of combined RX7i backplane power.
- Accepts 85–264 VAC or 100–150 VDC input.
- Provides protected +5 V, +12 V, and −12 V outputs.
The supply operates across the full 0–60 °C range without a required fan tray.
One AC-cycle ride-through helps the rack withstand brief line interruptions.
Output loading is calculated across all three rails rather than by adding their individual maxima.
General Electric IC698PSA100 PACSystems RX7i 100-Watt AC/DC Power Supply is available for quotation and official technical-file access.
General Electric IC698PSA100 PACSystems RX7i 100-Watt AC/DC Power Supply Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
IC698PSA100 Accepted Source Power
- AC range: The supply accepts 85–264 VAC.
- Frequency: AC operation covers 47–63 Hz.
- DC range: The DC input accepts 100–150 VDC.
- Wiring: Source protection and polarity follow cabinet design.
IC698PSA100 Backplane Rail Limits
- Combined rating: All rails share a 100 W ceiling.
- Five volts: The +5 V rail supplies up to 20 A.
- Positive twelve: The +12 V rail supplies up to 2 A.
- Negative twelve: The −12 V rail supplies up to 1 A.
IC698PSA100 Abnormal Condition Response
- Short circuit: Output faults activate protection.
- Overvoltage: Regulated rails are monitored.
- Overtemperature: Thermal overload stops unsafe operation.
- Ride-through: One AC cycle bridges brief line dips.
IC698PSA100 Temperature and Service
- Ambient: Operation spans 0–60 °C.
- Forced air: The supply does not require a fan tray.
- Loading: Rail and combined watts are checked together.
- Isolation: Input power is removed before service.