Features:
- Converts HPM output commands into discrete field-control states.
- Works through the installed termination and load-circuit arrangement.
- Supports relay, valve, indication and other compatible on/off duties.
The card delivers discrete commands from HPM control strategies to the connected field-control circuits.
The HPM writes the configured output image to the card, and the output channels switch their field-side circuits through the matched termination hardware. Application logic and permissives remain in the controller.
Record the live output image and place affected equipment in a safe state before exchange. Preserve MU-PDOX02 / 51304487-100, slot, termination, common and channel mapping exactly.
Availability is reviewed against the exact MU-PDOX02 51304487-100 order identity and requested supply condition; manufacturer lifecycle status: Discontinued / Obsolete by OEM.
Verified resources for Honeywell MU-PDOX02 51304487-100:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- The card supports on/off commands for compatible relays, annunciation circuits, valves and other discrete actuators in a TDC 3000 installation.
- Field voltage, load current, suppression components and fail-safe behavior are determined by the installed output circuit and termination assembly; these values must not be inferred from the service part number alone.
- Requires a safe output state and exact channel-map preservation before exchange.
- Delivers discrete field commands from HPM control strategies.
- Verify the exact part-number pairing before fitting a replacement output card.
- Output image and channel status require recording before replacement.
- Place affected equipment in a defined safe state before exchange.
- Preserve slot, termination, common, and channel mapping exactly.
- Honeywell service documentation classifies this assembly as a Digital Output card.
- Requires the installed HPM output termination and load-circuit configuration.
- Channels switch field circuits through the matched termination hardware.
- Application logic and permissives remain within the controller rather than the card.