Features:
- Eight-foot serial-extension length
- DB9 male-to-female connector arrangement
- Documented OEP/IKB adapter connection
The cable bridges a specific adapter-to-workstation serial path in the documented installation.
Male and female DB9 ends determine orientation and prevent substitution with a same-gender lead.
The -500 execution carries the eight-foot length required for an exact family comparison.
Apter Power supports Honeywell 51196990-500 serial-cable quotations, connector review and sourcing coordination for legacy workstation paths.
Honeywell 51196990-500 8 ft DB9 Male-to-Female Serial Extension Cable Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Source side: The cable is documented between the OEP/IKB adapter and the workstation serial path.
- Destination side: The workstation connection is identified as COM1.
- Interface type: The path uses DB9 serial connectors.
- System boundary: The cable should be evaluated in the documented workstation connection rather than as a generic extension.
- Male end: One side of the assembly uses a DB9 male connector.
- Female end: The opposite side uses a DB9 female connector.
- Extension format: The male-to-female arrangement defines the serial extension role.
- Selection boundary: Reversed or same-gender connectors describe a different cable requirement.
- Documented length: The 51196990-500 assembly is 8 feet long.
- Suffix meaning: Other 51196990 suffixes identify different cable lengths.
- Route planning: The installed OEP/IKB-to-COM1 path should be compared with the 8-foot execution.
- Inventory distinction: Length belongs with connector gender in the spare description.
- OEP/IKB workstation connection: The cable serves the documented adapter-to-COM1 path.
- Serial-extension maintenance: DB9 male-to-female construction supports the required connection format.
- Honeywell workstation service: The exact part number supports replacement of the installed serial cable.
- Length-controlled spare planning: The -500 execution identifies the documented 8-foot assembly.