Features:
- Provides mechanical mounting and screw terminal connections for Honeywell FSC 10020/F/1 I/O modules; no active electronics.
- Clearly labeled screw terminals (12-26 AWG) for power, inputs, outputs, and grounding; simplifies installation and maintenance.
- Supports both 35 mm DIN rail and direct panel mounting; includes integrated protective earth (PE) terminal for safety grounding.
The 51196694-928 is a purely passive termination baseplate – it contains no active electronic components such as processors, isolators, or relays. Its sole purpose is to provide a robust mechanical mounting point for Honeywell 10020/F/1 series Fail Safe Control I/O modules and to bring the module's electrical signals out to accessible screw terminals. This passive design ensures high reliability because there are no components to fail. The baseplate simply acts as an interconnect between the module’s backplane connector and the field wiring.
Industrial control systems require neat, reliable, and maintainable field wiring. The 51196694-928 addresses this with clearly labeled screw terminals for every electrical connection to the I/O module. Terminals are provided for field power (24V DC), input signals (e.g., from sensors or limit switches), output signals (to actuators or solenoids), and protective earth (PE) grounding. The screw terminals use a rising clamp design that accepts wire gauges from 12 to 26 AWG, accommodating both thick power cables and thin signal wires.
The 51196694-928 is designed for easy integration into standard industrial cabinets. It supports two mounting methods. The first is 35 mm DIN rail mounting, which is the industry standard for terminal blocks and small controllers. The baseplate clips onto the rail without tools and can be repositioned easily. The second method is direct panel mounting using screws through integrated mounting holes – useful in high-vibration environments where DIN rail could loosen. The baseplate also includes a dedicated protective earth (PE) terminal that must be connected to the cabinet ground busbar.
The 51196694-928 Honeywell Terminal Base may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL)by the manufacturer (OEM).
Honeywell 51196694-928 Terminal Base Manuals,
Datasheets,Drivers,Link
Important Notice:Other accessories,manuals,cables,calibration data,software,etc.are not
included with this equipment unless listed in the above stock item description.All prices are
shown in USD.
Honeywell 51196694-928 Terminal Base Specs
General
- Manufacturer Honeywell
- Model 51196694-928
- Condition New Original ready stock
- Product Family
51196694-927,51196694-926,51196694-929
Important Notice:Other accessories,manuals,cables,calibration data,software,etc.are not
included with this equipment unless listed in the above stock item description.All prices are
shown in USD.
- Refining and Chemical Control Centers: Upgrade the hardware interface components of operator stations to ensure operators can accurately control flow charts.
- Power Dispatch Rooms: Used for maintaining IKB keyboards and trackball modules on older control desks, extending the lifespan of legacy systems.
- Harsh Industrial Environments: Modules typically feature a G3 (Conformal Coating) coating, enhancing protection against moisture, dust, and corrosive gases, making them suitable for demanding industrial production lines.
- Industrial Automation Maintenance: Used as a dedicated maintenance spare part to repair or upgrade sluggish older PS/2 interface trackballs.
- Industrial-grade standards: Designed to meet the requirements of industrial control room environments, possessing high anti-static (ESD) and electromagnetic compatibility capabilities.
- Functional standards: As a firmware upgrade tool, it ensures that the hardware layer conforms to the original system design's data transmission protocols.
- Harsh Industrial Environments: Modules typically feature a G3 (Conformal Coating) coating, enhancing protection against moisture, dust, and corrosive gases, making them suitable for demanding industrial production lines.
- CE certification and RoHS compliance: Typically, these industrial electronic components meet basic electrical safety certifications to satisfy the access requirements of global industrial customers.
- Interface Compatibility: Designed specifically for IKB (Industrial Keyboard) trackballs using a PS/2 interface; does not support newer native USB interfaces.
- System Compatibility: Fully compatible with the Honeywell TDC 3000 system operator interface, working with the system's Global User Station (GUS) or Universal Station (US).
- Firmware Upgrade Capability: Designed to upgrade the internal firmware of older trackball modules to the latest version, fixing pointer drift or communication loss issues that may have occurred in earlier versions, and enhancing interoperability with modern display drivers.