Features:
- Runs Tricon safety logic on a 50 MHz 32-bit Motorola MPC860 processor.
- Provides dedicated DRAM, battery-backed SRAM and flash memory for controller execution.
- Exchanges synchronized application and I/O data across the isolated 25 Mbps TriBus.
The selected configuration is the Main Processor generation documented for Tricon releases 9.6 through 10.x.
Three processor channels execute the application in parallel and coordinate diagnostics, timing and I/O scans.
Confirm firmware, rack hardware, project release and a revision-matched processor set before installation.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Triconex 3008:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Supports safety-instrumented and emergency-shutdown logic in supported Tricon controllers.
- Provides fault-tolerant processing for continuous industrial protection and critical-process control.
- Maintains online controller operation while one processor channel is evaluated or serviced under approved procedures.
- Three processor channels execute the same control program independently and compare results.
- Mid-value and voting mechanisms prevent one processor discrepancy from controlling the plant response.
- Channel diagnostics identify internal faults while healthy processors maintain the required safety function.
- A 32-bit Motorola MPC860 provides the documented 50 MHz processing platform.
- Dedicated volatile, retentive and flash memory areas separate execution, retained data and stored firmware.
- The processor coordinates controller services through isolated TriBus and serial communication paths.
- Install the processor only within the environmental limits specified for the complete Tricon chassis.
- Maintain cabinet airflow and clearance so the processor set remains within its qualified temperature range.
- Avoid condensation and uncontrolled temperature transitions during storage, transport and commissioning.