Features:
- Acquires thirty-two differential 0–5 VDC signals.
- Provides twelve-bit conversion with a 55 ms input update rate.
- Uses TMR channel processing and supports online hot-spare replacement.
This ordering code identifies the original 3700 voltage-input configuration, not the extended 3700A variant.
The module converts multiple continuous process measurements for voted use by the Tricon main processors.
A correct installation retains the input scaling, shunt arrangement, termination panel and common-mode boundaries of the existing loops.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Triconex 3700:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Collects 0–5 V measurements from conditioners and process transmitters.
- Supports dense analog monitoring in emergency-shutdown and critical-control systems.
- Replaces an installed 3700 input module while the documented hot-spare strategy is maintained.
- The converter resolves each input with twelve-bit precision.
- All thirty-two channels update on a documented 55 ms cycle.
- Accuracy is specified below 0.15% of full scale from 0 to 60 °C.
- Independent channel data is passed through triplicated input processing before control use.
- Front indicators report PASS, FAULT and ACTIVE module conditions.
- Diagnostic coverage permits operation with a single internal channel fault while maintenance is planned.
- The analog-input module is designed for enclosed industrial Tricon installations.
- Documented system operation extends to 60 °C ambient under the specified chassis conditions.
- Non-condensing humidity and clean cabinet airflow protect low-level measurement stability.