Features:
- Provides unified network and serial communication services for a Tricon CX controller.
- Installs as a matched pair in the left and right positions of one 8120X COM slot.
- Includes status indication for module, network and synchronization functions.
The selected configuration is the Tricon CX UCM used when the controller requires consolidated host and plant-network communication.
It transfers controller data through configured Ethernet and serial services while supporting system time alignment.
Integration review must capture port media, protocol roles, IP settings, chassis position and the temperature limit with the UCM installed.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Triconex 4610X:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Connects Tricon CX safety data to supported supervisory and plant-system networks.
- Provides configured serial paths for devices that remain outside the Ethernet architecture.
- Supports redundant controller communication when a matched UCM pair is installed.
- Ethernet and serial interfaces provide the documented physical paths for external system communication.
- Time-synchronization support aligns the controller with the approved plant timing architecture.
- Front-panel indications expose communication and module status to maintenance personnel.
- Matched units can occupy the left and right positions of COM1 or COM2 in an 8120X main chassis.
- The paired arrangement supports redundant communication designs within the Tricon CX controller platform.
- Protocol assignments, host addresses and cable media must be coordinated with the surrounding control-system design.
- An 8120X chassis containing this module is specified for operation from 0°C to 55°C.
- Logic-power consumption is documented below 30 W and contributes to cabinet thermal loading.
- Ventilation and ambient-temperature checks must reflect the populated communication configuration rather than an empty chassis.