Features:
- New R-suffix 6E ordering code
- 512 MB DDR266 ECC SDRAM
- Scanbe ejector handles
MVME61006E-0161R is the new code shown for the 512 MB Scanbe-handle configuration in the official MVME6100 ordering cross-reference.
The design combines MPC7457 and AltiVec processing with the MV64360, dual Ethernet, serial ports, PMC-X sites, flash, NVRAM, and Tsi148 VME access.
Selection should retain the full R suffix and confirm Scanbe hardware, 6U chassis interfaces, mezzanine voltage, network routing, firmware, and required airflow.
The Motorola MVME61006E-0161R VMEbus Single-Board Computer is recorded as Active / Available from OEM; Apter Power offers configuration-review support.
Motorola MVME61006E-0161R VMEbus Single-Board Computer Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Motorola MVME61006E-0161R VMEbus Single-Board Computer Specs
General
- ManufacturerMotorola
- ModelMVME61006E-0161R
- ConditionNew and Original
- Product FamilyMVME6100 Series
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Compute and memory resources
- CPU: The MPC7457 processor operates at 1.267 GHz and includes AltiVec support.
- Cache hierarchy: Published resources include 512 KB L2 cache and 2 MB L3 cache.
- ECC memory: MVME61006E-0161R is fitted with 512 MB of onboard DDR266 SDRAM using ECC.
- Host controller: The MV64360 integrates memory, Ethernet, and PCI data paths around the processor.
6E order configuration
- Current code: The official table presents MVME61006E-0161R as the new part number for this configuration.
- Front hardware: Scanbe ejector handles are part of the documented ordering option.
- Board format: The assembly uses a 6U VME form factor with P1 and P2 backplane connections.
- Storage: Two 64 MB flash banks and 32 KB NVRAM support boot and retained information.
Compatibility review points
- Backplane: Confirm VME slot, bus role, connector engagement, and supported 2eSST capability.
- PMC-X hardware: Review module voltage, width, rear I/O, power, and frequency before installation.
- Thermal design: Provide forced-air cooling for the documented operating range.
- Software: Match firmware, boot parameters, console settings, drivers, and application requirements to MVME61006E-0161R.