Features:
- Bridges Ethernet TCP/IP Networks with Modicon Quantum Rack Backplane
- Integrates Data Editing Functions with Rack Visualization Capabilities
- Functions Alongside Standard Quantum I/O Modules and Processors
The Schneider Electric 140NOE77101 Ethernet network TCP/IP module operates as the primary Ethernet communication interface in a Modicon Quantum rack, enabling robust TCP/IP network connectivity for all modules within the system. It continuously facilitates data exchange between the Quantum backplane and Ethernet networks (10/100 Mbps), providing remote access for configuration, monitoring, and diagnostics through standard network protocols. Seamless network integration is standard with the 140NOE77101, however utilizing its data editor and rack viewer functions will allow operators to modify parameters and monitor module status remotely without requiring direct physical access to the control cabinet. The 140NOE77101 incorporates Class B30 certification and advanced network management capabilities within the Quantum platform.
The 140NOE77101 provides essential communication functions common to the entire rack, and is a critical component of the control network path, directly affecting the proper, normal operation of the overall distributed control system. One 140NOE77101 module is typically installed per rack depending on the desired network architecture. The 140NOE77101 occupies a single full slot in the Quantum rack and is positioned according to standard chassis configuration guidelines.
For comprehensive network management applications, the 140NOE77101 supports multiple simultaneous connections through its embedded TCP/IP stack. In addition to standard data transmission operations, the module performs rack visualization functions. The 140NOE77101 rack viewer capability executes monitoring using the internal diagnostic registers specified in the module firmware. Using this method, the 140NOE77101 continually polls the health status of all rack-mounted modules. If the system detects that any module is reporting abnormal status or communication errors, it will automatically log the event and make this information available to connected network clients for immediate corrective action.
The 140NOE77101 Schneider Electric Ethernet network TCP/IP module may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Schneider Electric 140NOE77101 Ethernet network TCP/IP module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Schneider Electric 140NOE77101 Ethernet network TCP/IP module Specs
General
- Manufacturer Schneider Electric
- Model 140NOE77101
- Condition New Original ready stock
- Product Family 140CPU67160,140NOE77111,140NOC77101
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Remote Facility Management: The 140NOE77101 is frequently used in unmanned water treatment plants or remote pumping stations. It solves the problem of geographical isolation by allowing technicians to access the PLC’s internal data via a standard web browser.
- Data Aggregation for SCADA: This 140NOE77101 module is designed to handle the continuous flow of information between the field level and the control room. It solves the bottleneck of low-bandwidth serial connections by providing 10/100 Mbps throughput for real-time SCADA updates.
- Commissioning and Tuning: During the initial setup of a production line, the 140NOE77101 uses its Data Editor to allow engineers to tweak PID loops and operational parameters on-the-fly without needing to connect a dedicated programming laptop to every individual rack.
- Real-Time Monitoring: The 140NOE77101 features an integrated Rack Viewer that provides a visual health check of the hardware. This solves the problem of "blind troubleshooting," where engineers previously had to manually probe modules to find a faulty unit.
- Network Integrity: To protect against communication loss, the 140NOE77101 includes SNMP (Simple Network Management Protocol) support. This allows IT departments to monitor the module as a network node, triggering alerts if the link quality drops or if unauthorized access is attempted.
- FDR (Faulty Device Replacement): The 140NOE77101 supports FDR services, which solves the problem of complex reconfiguration during hardware failure. When a module is replaced, the service automatically pushes the stored IP address and configuration to the new unit, minimizing MTTR (Mean Time To Repair).
- Physical Setup: The 140NOE77101 is a single-slot module that plugs directly into any available slot on a Modicon Quantum backplane. It features two primary ports: an RJ45 for copper-based Ethernet and an MT/RJ for fiber optic connections, solving the issue of electromagnetic interference (EMI) in heavy industrial zones.
- Software Integration: This 140NOE77101 is fully integrated with Unity Pro (now EcoStruxure Control Expert). It solves compatibility headaches by using standard Modbus TCP/IP protocols, allowing it to "talk" to both modern Schneider hardware and third-party devices seamlessly.
- Hot Swap Capability: Designed for continuous operations, the 140NOE77101 can be installed or removed while the rack is powered (within a Hot Standby configuration), ensuring that network maintenance does not require a total system shutdown.