Features:
- The SLM diagnostic box monitors telegrams carried by a SIMOLINK network.
- A measuring PC receives the collected communication data for external evaluation.
- The required diagnostic and analysis software is ordered separately from the monitor hardware.
The monitor observes drive-network communication without replacing the SIMOLINK switching hardware.
Captured telegram information moves from the optical network toward the connected analysis computer.
A complete diagnostic setup therefore includes the monitor, the PC connection and the matching software package.
The Siemens 6SX7005-0AF00 SLM SIMOLINK Monitor may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6SX7005-0AF00 SLM SIMOLINK Monitor Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Observing traffic without changing network roles
- Network source: The monitor receives the SIMOLINK telegram stream selected for diagnosis.
- Recorded content: Communication telegrams provide the data set for the later examination.
- Passive role: The SLM is identified as a monitor rather than a network switch.
- Test boundary: Drive operation remains a separate function of the connected SIMOVERT system.
Moving measurement records to the analysis station
- Host device: A measuring PC forms the external destination for the diagnostic data.
- Connection purpose: The link carries records for evaluation rather than normal drive commands.
- Session setup: The monitor and PC must be connected as one diagnostic arrangement.
- Result handling: Captured traffic is reviewed outside the converter hardware.
Completing the diagnostic workflow
- Separate item: The diagnostic and analysis program is not included with the SLM hardware.
- Evaluation step: Software on the measuring PC interprets the collected telegram information.
- Order check: The required program package must be identified separately when assembling the toolset.
- Hardware limit: Without analysis software, the box cannot provide the complete PC-based evaluation workflow.
Keeping the monitor distinct from adjacent accessories
- SLM function: The SLM designation corresponds to monitoring SIMOLINK telegrams.
- Switch function: Changing optical network paths belongs to a separate SIMOLINK switch product.
- Pulse function: Generating speed-proportional signals belongs to a different accessory.
- Selection rule: Use the full order number when the requirement is telegram diagnosis at a measuring PC.