Features:
- Connects field I/O to ABB control systems via 16 AI and 32 DI/DO
- Channel-to-channel isolation ≥2.5 kV DC for EMC/EMI protection
- Designed for ABB Advant, Master, and Procontrol P14 platforms
The PFSK109 YM322001-EK serves as a central connection unit within ABB's Advant, Master, and Procontrol P14 control systems, consolidating field device signals into a manageable interface. It integrates approximately 16 analog channels (4-20mA/0-10V) and up to 32 digital I/O channels, acting as the critical bridge between field sensors, actuators, and the main controller. This concentrated signal management simplifies cabinet wiring, reduces termination points, and improves system maintainability.
The PFSK109 YM322001-EK prioritizes system integrity through comprehensive protection and isolation mechanisms. It provides channel-to-channel electrical isolation of ≥2.5 kV DC, which is critical for preventing ground loops and protecting sensitive control electronics from transient voltage spikes and electrical noise common in industrial environments. The module also features triple isolation between power, signal, and communication paths, along with built-in overvoltage, overcurrent, short circuit, and reverse polarity protection.
The PFSK109 YM322001-EK supports multiple communication protocols to ensure compatibility with diverse industrial automation architectures. It features RS-485 interfaces for Modbus RTU connectivity, enabling integration with legacy field devices, and supports higher-level protocols like Modbus/TCP and Profinet for newer control networks. This protocol flexibility allows the PFSK109 YM322001-EK to function in mixed environments, acting as a bridge between older ABB systems and modern industrial Ethernet networks.
The PFSK109 YM322001-EK ABB Connection Unit may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL) by the manufacturer (OEM).
ABB PFSK109 YM322001-EK Connection Unit Manuals,
Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
ABB PFSK109 YM322001-EK Connection Unit Specs
General
- Manufacturer ABB
- Model PFSK109 YM322001-EK
- Condition New Original ready stock
- Product Family
PFUK104 YM110002-SD,PFUK108 YM110001-SH,FSK101 YM322001-ED
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
- Cold Rolling Mills (CRM): Installed at the exit station of high-speed steel, stainless steel, and aluminum rolling mills to interface sensor lines monitoring strip shape.
- Foil and Thin Gauge Production Line: Serves as the localized termination point for high-precision, low-force tension measurement devices handling copper or aluminum foils.
- Sub-Rack Distribution Panels: Positioned inside centralized automated control cabinets to route multi-channel sensor signals coming directly from the mill floor's measurement rolls.
- Transducer Wire Termination: Features dense, vibration-resistant terminal block arrays engineered to firmly clamp the output wires extending from individual zones of the Stressometer roll.
- Shielding & Grounding Planes: Built with dedicated, low-impedance grounding tracks designed to immediately siphon off electromagnetic interference (EMI) caused by massive nearby mill motors, preserving raw signal integrity.
- Point-to-Point Signal Routing: Translates field wiring layouts into a unified internal ribbon-cable interface, pushing clean radial and tangential force signals directly toward adjacent channel control boards (like the PFSK110).
- CE Marking & European Directives: Fully compliant with the European EMC Directive 2014/30/EU for noise immunity and emission constraints in heavy industrial zones, alongside the Low Voltage Directive (LVD) 2014/35/EU.
- Industrial Noise Standards: Evaluated under the EN 61326-1 standard for electrical equipment in control and laboratory contexts, ensuring raw sensor loops are not corrupted by high-voltage grid switches.
- Material Environmental Compliance: Built in accordance with ABB Global Materials Frameworks, meeting RoHS (Restriction of Hazardous Substances) and REACH policies to eliminate banned toxic compounds from the PCB assembly.