- Advant Controller 31 communication module family
- 07KP90 base designation shown in ABB system documents
- Complete suffix required for replacement selection
07KP90 is an ABB Advant Controller 31 communication module family designation.
ABB’s dedicated RCOM manual covers the 07KP90 R303 variant, while system documentation uses the 07KP90 base marking within the controller architecture.
Before installation or replacement, verify the complete suffix, host controller, communication protocol, connectors, wiring, and saved project.
Availability, condition, price, and shipping time for 07KP90 are confirmed during quotation.
ABB 07KP90 Communication Module Family Manuals, Product Series, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- ABB catalog type 07KP90 corresponds to order code GJR5 251 000 R0303.
- The dedicated hardware documentation names the complete communication variant 07KP90 R303.
- ABB identifies 907 KP 90 R202 as the associated planning software package.
- rInterface 1 provides RCOM communication over RS232/RS485.
- Interface 2 is an RS232 port for commissioning.
- The catalog specifies 24 V DC supply and a ribbon-cable connection to the CPU.
- The R303 variant can be planned as an RCOM master or slave.
- An RCOM network supports up to 254 slaves, limited to 8 with MasterPiece 200 and 30 in dial-up operation.
- ABB documents dedicated lines, telephone lines, and modem-adapted transmission paths.
- Data exchange between ABB MasterPiece 200, Procontic T200, and Advant Controller 31 systems.
- RCOM communication between Advant Controller 31 systems.
- Remote master/slave links over dedicated, telephone, or modem-adapted paths.