Features:
- WXGA workspace: 12.1-inch 1280 × 800 widescreen touch display
- Resilient topology: embedded switch supports DLR and linear networks
- Large-panel role: broad operator view within Standard ME application limits
The 12W code identifies a widescreen canvas whose proportions differ from both 9W and the 4:3 terminals.
Its dual-port architecture suits a large local station that must remain part of a documented ring or in-line network.
Application conversion, panel fit, indoor rating, Series, and firmware are independent acceptance gates.
For 2711P-T12W22D8S, Apter Power can coordinate documentation review, quotation, and sourcing support.
Verified resources for 2711P-T12W22D8S:
Important Notice: Confirm the required firmware, application files, cables, accessories, and documentation in the quotation before ordering.
- Native canvas: build the ME project for the 1280 × 800 target resolution.
- Object placement: use the wide workspace without stretching 4:3 graphics or text.
- Alarm visibility: confirm banners, lists, and acknowledgement controls remain readable.
- Operator signoff: test navigation and touch reach across the full 12.1-inch surface.
- Two-port role: use the embedded switch for one documented ring or linear path.
- Ring acceptance: verify controller communication through a deliberate single-link break.
- Switch records: retain terminal IP, device name, controller shortcut, and neighboring nodes.
- Removal plan: provide a bypass or outage method before disconnecting an in-line HMI.
- Enclosure scope: apply the marked Type 12, 13, and 4X indoor conditions only.
- Panel seal: use the correct cutout, gasket, mounting levers, and flat mounting surface.
- Environment: keep operation within 0...55 °C and 5...95% noncondensing humidity.
- Outdoor gate: follow the separate official precautions rather than extending the indoor rating by assumption.
- Large widescreen machine HMI: present detailed process graphics and alarms from a local touch station.
- DLR operator node: add the large display to a supported resilient EtherNet/IP machine network.
- Logix visualization: monitor and control one supported ControlLogix 5570 or CompactLogix 5370 controller.