Features:
- 3/8-24 UNF thread with 3.9-inch unthreaded length and 6.7-inch overall case provides extended reach for deep-well mounting through thick casings.
- FluidLoc cable technology prevents oil migration through the cable interior, eliminating the need for field-applied sealing compounds.
- CSA, ATEX, and IECEx approvals enable global hazardous area deployment while 8 mm construction delivers superior resistance to physical abuse.
The 330101-39-67-10-12-05 gets the sensing tip where it needs to go. Its 3.9-inch unthreaded section passes through thick casings and insulation layers without spacers. The 6.7-inch case provides the structural backbone for this extended reach. For compressors and turbines with thick walls, this probe eliminates the hassle of stacking adapters.
Oil wicking through cable interiors is a common failure in lubricated machinery. The 330101-39-67-10-12-05 solves this with FluidLoc technology—an internal barrier factory-installed, not field-applied. No sealing tape, no compounds. Just thread it in, connect it, and the fluid path is blocked.
One probe, three approvals. CSA for North America, ATEX for Europe, IECEx for international sites. The 330101-39-67-10-12-05 moves from a Texas refinery to a German chemical plant to an offshore platform without changing part numbers. The 8 mm construction takes the abuse that 5 mm probes can't handle.
The 330101-39-67-10-12-05 Bently Nevada 3300 XL 8 mm Proximity Probes may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330101-39-67-10-12-05 3300 XL 8 mm Proximity Probes Manuals,
Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
Bently Nevada 330101-39-67-10-12-05 3300 XL 8 mm Proximity Probes Specs
General
- Manufacturer GE / Bently Nevada
- Model 330101-39-67-10-12-05
- Condition New Original ready stock
- Product Family
330101-39-67-10-01-05,330101-39-67-10-11-05,330101-39-67-10-12-00
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
- Large Rotating Machinery Monitoring: Specifically designed for steam turbines, compressors, gearboxes, large water pumps, and motors.
- Radial Vibration: Detects the relative displacement between the journal and bearing, identifying imbalance, misalignment, or looseness.
- Axial Displacement: Monitors thrust bearing wear, preventing fatal collisions between the rotor and stator.
- Speed and Phase (Keyphasor): Provides accurate speed signals and vibration phase references.
- Explosion-proof Certifications: Certified by ATEX, IECEx, CSA, and NEPSI (China), allowing installation in flammable and explosive hazardous areas such as Zone 0, Zone 1, and Zone 2.
- Environmental Protection Standards: Meets IP68 rating (with appropriate enclosure), ensuring a tight seal in humid or submerged environments.
- Mechanical Performance Standards: Meets API 670 (American Petroleum Institute) standards, the internationally recognized industry standard for rotating machinery protection systems.
- System Compatibility: Fully compatible with Bently Nevada's 3500 monitoring system, 2300 series monitors, and Trendmaster® system.
- Preamplifier Compatibility: Must be used with the 3300 XL Proximitor® preamplifier. While it can physically connect to older 3300 systems, the complete 3300 XL kit is recommended for optimal linearity and accuracy.
- Cable Length Consistency: The "10" in the model number represents a 1.0-meter system length. During installation, ensure that the total length of the probe cable + extension cable precisely matches the preamplifier's specified length (typically 5 meters or 9 meters) to avoid sensitivity errors.