Features:
- Configured for tight-clearance environments where counter bore, side view, or rear view restrictions are present.
- Mechanically and electrically compatible with previous 3300 RAM probe and extension cable systems.
- Uses ClickLoc connectors, TipLoc molding method, and CableLoc design with 220 N pull strength.
Bently Nevada 330905-00-18-05-02-CN is designed for use in the 3300 XL NSv proximity transducer system, which targets machinery monitoring applications with restricted installation space. The system architecture combines a probe, extension cable, and NSv Proximitor Sensor to form a complete measurement chain. The probe construction supports installation in environments where standard probe systems cannot be applied due to spatial constraints. Its stainless steel housing and PPS tip structure are aligned with compact industrial measurement requirements. The ClickLoc connector system ensures secure electrical connection within the transducer assembly.
Bently Nevada 330905-00-18-05-02-CN features a 180 mm case length and 0.5 meter total cable length configuration. The probe uses an AISI 304 stainless steel body combined with PPS tip material and a 4.0 ± 0.5 Ω DC resistance specification. Operating and storage conditions extend from -52°C to +177°C (-62°F to +351°F), allowing consistent electrical behavior across environmental variations. The NSv system is structured for applications involving small shaft or limited target geometries. It also supports measurement functions including radial vibration, axial position, and speed-related signals.
The NSv probe system including Bently Nevada 330905-00-18-05-02-CN is designed to replace or upgrade from earlier 3300 RAM and 3000/7000-series systems depending on configuration requirements. The probe and cable assembly provides mechanical and electrical compatibility with earlier RAM components while maintaining improved chemical resistance characteristics. Gold-plated brass ClickLoc connectors, TipLoc bonding, and CableLoc pull strength reinforcement are integrated into the system design. Connector protection accessories are supplied to minimize liquid ingress at connection interfaces. The overall structure maintains compatibility while supporting compact installation demands in process machinery environments.
The 330905-00-18-05-02-CN Bently Nevada 3300 NSv Proximity Probe may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330905-00-18-05-02-CN 3300 NSv Proximity Probe Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330905-00-18-05-02-CN 3300 NSv Proximity Probe Specs
General
- Manufacturer GE / Bently Nevada
- Model 330905-00-18-05-02-CN
- Condition New Original ready stock
- Product Family 330905-00-18-10-02-CN,330905-00-18-50-02-CN,330905-00-18-70-02-CN
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Extreme Temperature Operation: The probe can operate stably over a wide temperature range of -51°C to +177°C, adapting to various environments from extreme cold to high-temperature bearing housing interiors.
- Pressure Sealing: The probe tip uses a TipLoc molding process, capable of withstanding differential pressure between the sensor probe and the housing, preventing leakage of lubricating oil or process gases.
- High Humidity Protection: Through the ClickLoc gold-plated connector and optional connector shield, moisture, oil, and condensate can be effectively prevented from entering the electrical connections, ensuring signal stability.
- Corrosion protection: The probe housing and cable are optimized for various industrial lubricants and corrosive gases, extending their service life in harsh process fluids.
- Explosion-proof Certification: This model (suffix -CN) complies with hazardous area safety standards in China and other regions, supporting Ex ia IIC intrinsically safe or Ex nA IIC spark-free installation.
- Industry Standards: The system design references API 670 standards, ensuring high reliability and temperature stability in monitoring critical rotating machinery in petroleum, chemical, and other industries.
- Electromagnetic Compatibility: Complies with European CE marking requirements, possesses excellent immunity to radio frequency interference (RFI/EMI), and can operate in electromagnetically complex industrial environments without the need for special metal-shielded flexible tubing.
- Functional Safety: Supports SIL (Safety Integrity Level) safety instrumented system integration, and can be used as a critical sensor input for mechanical protection systems (such as the Bently Nevada 3500) to prevent catastrophic failures.
- Compact Compressor Monitoring: Specifically designed for centrifugal air compressors, refrigeration compressors, and small process gas compressors, where installation space is typically extremely limited.
- Small Shaft Radial Vibration: Suitable for monitoring shafts with diameters less than 51 mm (2 in). Its unique "narrow-side view" characteristic provides superior measurement accuracy on small targets compared to standard probes.
- Axial Displacement Measurement: Used to monitor the axial position of rotors in flat target areas less than 15 mm (0.6 in), preventing rotor-stator collisions.
- Chemical Corrosion Resistance: Compared to older RAM probes, the NSv probe offers enhanced chemical resistance, allowing deployment in highly corrosive process gas environments.