Features:
- 3/8-24 UNF Thread Proximity Probe Without Armor for 3300 NSv Transducer Systems
- Delivers Enhanced Chemical Resistance and Full Interchangeability with 3300 RAM Legacy Components
- Provides Superior Side-View Characteristics Compared to 3000-Series 190 Probes at Equivalent Gap Distances
The 330908-00-15-10-02-05 operates as a precision proximity probe within the 3300 NSv transducer system, providing reliable displacement and vibration measurement for rotating machinery protection applications.The 330908-00-15-10-02-05 is mechanically and electrically compatible with Bently Nevada's previous 3300 RAM proximity probe and extension cable, allowing seamless integration into existing installations. The 330908-00-15-10-02-05 has increased chemical resistance compared to the 3300 RAM probe, enabling its use in demanding process compressor applications where corrosive conditions are present.
The 330908-00-15-10-02-05 provides essential sensing functions within the transducer path and is a critical component of the machinery monitoring system, directly affecting the accuracy and reliability of vibration and position measurements. The 330908-00-15-10-02-05 is equipped with a miniature coaxial ClickLoc connector and standard cable, and carries multiple agency approvals for broad industrial deployment. One 330908-00-15-10-02-05 probe per measurement point is required, and it must be installed at the correct gap distance from the target material to ensure proper signal output.
For reliable signal integrity in harsh industrial environments, the 330908-00-15-10-02-05 system requires proper connector protection at both the probe-to-extension cable junction and the cable-to-Proximitor Sensor interface. All components of the transducer system utilize gold-plated brass ClickLoc connectors that lock into place to prevent loosening from vibration. Silicone tape is provided with each 3300 NSv extension cable and can be used as an alternative to connector protectors, though silicone tape is not recommended where the 330908-00-15-10-02-05 probe-to-extension cable connection will be exposed to turbine oil.
The 330908-00-15-10-02-05 Bently Nevada 3300 NSv Proximity Probe may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330908-00-15-10-02-05 3300 NSv Proximity Probe Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330908-00-15-10-02-05 3300 NSv Proximity Probe Specs
General
- Manufacturer Bently Nevada
- Model 330908-00-15-10-02-05
- Condition New Original ready stock
- Product Family 330908-00-15-10-02-00,330908-00-15-10-02-CN
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Small Diameter Shafts: Optimized for measuring radial vibration on shafts smaller than 51 mm (2 inches).
- Minimal Axial Targets: Ideal for measuring axial (thrust) position on flat targets smaller than 15 mm (0.6 inches).
- Restricted Spaces: Used inside small centrifugal air compressors, refrigeration compressors, small pumps, and industrial gearboxes.
- API 670 Compliant: Adheres strictly to the American Petroleum Institute’s standards for machinery protection systems regarding accuracy and linear range.
- Hazardous Area Approvals (Option 05): Covered globally by certifications for intrinsic safety (Ex ia) and non-incendive environments.
- CE Mark: Certified for high immunity against ambient industrial radio frequency interference (RFI) and electromagnetic interference (EMI).
- Probe Operating & Storage Temperature: Rated from -34°C to +177°C (-30°F to +351°F).
- Extension Cable Temperature: Rated from -52°C to +177°C (-62°F to +351°F).
- Relative Humidity Compatibility: Designed to withstand up to 100% condensing humidity. The tip and probe body maintain an environmental seal, while connectors must be properly insulated to prevent signal drift.