Features:
- Interface Between the System Configuration Workstation and 3500 Rack Backplane
- Integrates Capability of Centralized Parameter Storage with System-Wide Configuration Management
- Functions in Conjunction with All M Series and Standard 3500 Monitors
The 3500/01-01 operates as the Rack Configuration Software Module in a 3500 rack, providing centralized configuration management for all modules within the system. It continuously stores and distributes system parameters, channel settings, and operational configurations through the rack backplane to support coordinated operation of all monitors and modules. Seamless configuration access is standard with the 3500/01-01, however using proper backup procedures will allow seamless recovery of system settings in the event of a primary configuration loss.
The 3500/01-01 provides essential configuration functions common to the entire rack, and is a critical component of the monitoring path, directly affecting the proper, normal operation of the overall monitor system. One 3500/01-01 configuration module is required per rack to establish the system parameter baseline. The 3500/01-01 occupies a dedicated slot position in the rack and serves as the central repository for all channel calibration data, alarm setpoints, and relay logic definitions.
For comprehensive system configuration applications, the 3500 System requires the 3500/01-01 module installed in its designated slot. In addition to standard parameter storage, the configuration module also performs automatic distribution of settings to all connected I/O modules. The 3500 configuration system executes parameter synchronization using the internal communication protocols specified in the rack backplane architecture.
The 3500/01-01 Bently Nevada Rack Configuration Software Module may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 3500/01-01 Rack Configuration Software Module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 3500/01-01 Rack Configuration Software Module Specs
General
- Manufacturer Bently Nevada
- Model 3500/01-01
- Condition New Original ready stock
- Product Family 3500/22M,3500/20,3500/42M,3500/40M
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Machinery Protection Setup: Programs trip limits, alarm thresholds, and emergency bypass functions for critical rotating assets like turbines and compressors.
- Sensor and I/O Calibration: Defines specific parameter settings for proximity probes, velocity sensors, accelerometers, RTDs, and thermocouples.
- System Commissioning: Validates channel communication, verifies channel logic, and tests hardware statuses prior to operational machinery startup.
- Relay Logic Routing: Maps sensor alarms to physical system output relays to trigger automated machine trip commands and emergency shutdowns.
- Access Control Management: Restricts configuration changes through multi-level password security and software user access rights.
- Operating System: Microsoft Windows 7, Windows 10, or Windows Server 2012 (and later), requiring English operating system versions.
- Processor and Memory: Minimum Intel Pentium processor or equivalent, with 128 MB RAM or higher.
- Storage Space: Minimum 35 MB of available hard drive storage for software installation.
- Communication Interfaces: Connects via standard RS232 serial ports, USB-to-serial conversion adapters, or dedicated Ethernet TCP/IP networks.
- Network Scale: Supports multi-rack industrial networks, allowing configuration management for up to 1,000 active machine protection racks.
- API 670 Standard: Complies fully with American Petroleum Institute (API) 670 standards for machinery protection systems in oil and gas.
- Functional Safety (SIL): Integrates into protective systems certified up to SIL 2 safety integrity levels for hazardous emergency circuits.
- Hazardous Area Isolation: Configures internal galvanic barriers and Zener isolators for intrinsically safe deployments in Class I, Division 2 environments.
- Environmental Directives: Meets international industrial electronics standards, including CE requirements and RoHS environmental directives.
- Cybersecurity Protection: Enforces configuration integrity using physical hardware keyswitch lockouts on the Transient Data Interface (TDI) module alongside electronic security codes.