Features:
- Runs EX2100 application code as the control-layer master.
- Combines local processing, flash storage and backplane access.
- Provides Ethernet plus two independent serial channels.
IS215ACLAH1A integrates the processor and communication resources used by the EX2100 application-control layer.
The module stores its operating software and configuration in flash while live execution uses local DRAM and cache.
Front-panel indicators separate controller state, network traffic and flash activity for focused checks.
The General Electric IS215ACLAH1A EX2100 Application Control Layer Module is listed as Active / Available from OEM. Apter Power can support identification and configuration review.
General Electric IS215ACLAH1A EX2100 Application Control Layer Module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Execution Resources
- Master role: IS215ACLAH1A executes the EX2100 application code.
- Working memory: DRAM supports live program execution.
- Stored image: Flash retains the operating system, application and configuration.
- Local acceleration: Secondary cache supports the 486DX4 processor.
Communication Separation
- Ethernet path: One 10BaseT interface carries network communication.
- COM1 purpose: COM1 provides the serial loader path.
- COM2 purpose: COM2 remains available as the second serial channel.
- Boundary: The ACLA arrangement does not add the ISBus interface used by ACLI variants.
Startup Storage
- Boot content: IS215ACLAH1A retrieves its operating image from flash.
- Configuration content: Stored control configuration remains with the flash image.
- Runtime area: DRAM supplies the main working space after startup.
- Cache layer: L2 cache sits between the processor and main memory activity.
Front-Panel Evidence
- OK: Reports the controller health state.
- ACTIVE: Indicates application execution status.
- ENET: Flashes with Ethernet activity.
- FLASH and STATUS: Separate flash access from coded status reporting.