Ask our team:
  • Phone: +86 181 0690 9650
  • E-Mail sales1@apterpower.com
How We Verify Your Order
Before dispatch, we confirm the exact model, revision, condition, inspection requirements and shipping documents for your order.
See a real on-site verification case >>

IS200VCRCH1B

/ 4.9
1001 reviews | Need a Specific Revision?
GE IS200VCRCH1B combines 48 timestamped contact inputs and 24 relay-output commands in a single-width Mark VI VME I/O board.
In Stock
Ships by Saturday, November 14
Fast Shipping Available
Get a quick price for IS200VCRCH1B
Quantity
*E-mail
Company
*Mobile
*Content
Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Technical specifications for IS200VCRCH1B

  • Manufacturer:
    General Electric
  • Part Number:
    IS200VCRCH1B
  • Product Family:
    GE Mark VI Gas Turbine Control
  • Product Type:
    Mark VI Discrete Contact Input and Relay Output Board
  • Stock:
    1
  • VME Width:
    Single-width board
  • Contact Inputs:
    48
  • Relay Outputs:
    24
  • SOE Time Resolution:
    1 ms
  • Terminal Boards:
    Two TBCI and two TRLY, or documented DIN-rail alternatives
  • DIN Contact Board:
    DTCI, 24 inputs per board
  • DIN Relay Board:
    DRLY, 12 Form-C outputs per board
  • I/O Processor:
    TMS320C32-based Mark VI architecture
  • Scheduling:
    1 ms and 5 ms I/O task rates
  • Configuration:
    Downloaded through Control System Toolbox
  • Identification Packet:
    Hardware catalog, revision, barcode serial, firmware catalog and version
  • Terminal Identity:
    ID wire in each 37-pin cable
  • Operating Temperature:
    0 to 60°C at bottom of I/O module
  • Humidity:
    5 to 95% RH, non-condensing
  • Tariff Code:
    8538900000
  • Country of origin:
    USA
  • Place of shipment:
    Xiamen,Fujian,China
By purchasing this item, you agree to the Terms & Conditions, ApterPower is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with ApterPower's 1-year warranty.

More Information

Overview Manuals Contact Acquisition Relay Delivery Event Sequence Application
  • Processes 48 contact inputs with 1 ms sequence-of-events timing
  • Commands 24 relay outputs through two terminal-board connections
  • Identifies its hardware, firmware and connected terminal boards to VCMI

IS200VCRCH1B consolidates the discrete input and relay-output workload that required two VME slots in the earlier VCCC arrangement, freeing rack space without changing the field-terminal concept.

Contact transitions are timestamped for sequence-of-events analysis, while relay commands are delivered through TBCI/TRLY or the documented DIN-rail DTCI/DRLY alternatives.

Correct replacement requires the same terminal-board pair, cable identities, toolbox I/O configuration and H1B revision; the board ID mechanism will report a mismatch when connected hardware does not agree.

Availability, condition, price, and shipping time for IS200VCRCH1B are confirmed during quotation.

General Electric IS200VCRCH1B Mark VI Discrete Contact Input and Relay Output Board Manuals, Datasheets, Links

Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

  • Forty-eight field contacts are scanned through the connected terminal boards
  • Transitions receive one-millisecond sequence-of-events timestamps
  • Toolbox point assignments define the control meaning of each channel
  • Twenty-four commands are divided across two relay terminal boards
  • Form-C field contacts remain powered by the external circuit
  • Loss of I/O communication drives the documented de-energized state
  • Input changes are ordered against the Mark VI timing reference
  • Event data supports post-trip analysis
  • Clock and point-map verification is repeated after board replacement
  • Turbine auxiliary contact monitoring
  • Solenoid and interposing-relay command output
  • Sequence-of-events capture for trips and permissives
Description
IS200VCRCH1B is a single-width Mark VI VME discrete I/O processor for contact acquisition and relay control.

It scans 48 inputs, produces 24 relay-output commands, timestamps input changes to 1 ms and reports catalog, hardware, firmware and terminal-board identity through VCMI.

Before exchange, save the I/O configuration and sequence-of-events baseline, photograph J3/J4 routing and label both terminal-board cables; after restart, prove every input, relay, diagnostic and fail-safe de-energization path.
Revisions

Revision Part #

Also known as

IS200VCRCH1B
IS200VCRCH1B, Series B, Rev B
Alternative Names
IS200 VCRC H1B IS200-VCRC-H1B VCRC H1B GE IS200VCRCH1B General Electric IS200VCRCH1B Mark VI VCRC IS200VCRCH1B
Technical notes
IS200VCRCH1B must match the H1B board identity, VME slot, J3/J4 terminal-board cables, downloaded point configuration, relay power arrangement, SOE timing and ID-chip diagnostics before process release.
Exceptional Service

Our Mission

  • 100% Satisfaction

    We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.
  • Trust Guaranteed

    Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our Warranty.
  • Expertise

    Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.

FAQS

The following is a list of questions commonly asked by our customers. Please contact us if you have a question about our process that is not answered below.
What configuration should be saved before replacing IS200VCRCH1B?
Save the Toolbox I/O configuration, point assignments, relay logic, SOE settings and diagnostic baseline associated with that rack slot.
Can IS200VCRCH1B use the terminal cables from a VCCC installation?
Only if the approved migration and terminal-board arrangement agree; verify J3/J4 destinations, connector IDs and project drawings before reuse.
Why can IS200VCRCH1B report a hardware incompatibility after seating?
The board reads ID devices through the 37-pin cables; a wrong terminal board, connector location or cable assignment can trigger the mismatch.
What must be tested on IS200VCRCH1B after replacement?
Exercise all affected contact inputs, relay outputs, sequence-of-events timestamps, coil-voltage diagnostics and communication-loss de-energization behavior.
Does IS200VCRCH1B preserve contact timing during a board swap?
No historical events are created while the board is unpowered; record the shutdown window and verify clock and event ordering after restart.
Can IS200VCRCH1B relay outputs be megger-tested through the board?
Do not apply insulation-test voltage through connected electronics; isolate field circuits and follow the terminal-board and site test procedure.
What environmental check matters for IS200VCRCH1B?
Confirm rack cooling, 0–60°C module temperature, non-condensing humidity and any Class I Division 2 installation conditions before energizing.