Features:
- 2 MB user memory with 2 MB non-volatile flash
- Dual Gigabit Ethernet ports and industrial protocol support
- Energy Pack retention and USB removable-storage operation
IC695CPE302 is the 2 MB member of the PACSystems RX3i CPE302/305/310 controller platform.
The CPU executes real-time machine and process control while communicating with I/O over the RX3i backplane and with supervisory systems through Ethernet or serial links.
Hardware platform, RX3i backplane revision, PAC Machine Edition version, Energy Pack status, and the intended PROFINET architecture must be checked together.
The General Electric IC695CPE302 PACSystems RX3i CPE302 Controller is available for quotation, official documentation, and configuration support from Apter Power.
General Electric IC695CPE302 PACSystems RX3i CPE302 Controller Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Embedded controller communications
- Ethernet interface: Two Gigabit ports provide the controller network connection.
- OPC UA: Encrypted OPC UA connections support secure data access within the approved firmware environment.
- Client and server capacity: The controller supports documented SRTP and Modbus TCP server and client-channel counts.
- Serial channel: ASCII and Modbus RTU communication are available through the serial interface.
Platform and rack requirements
- Backplane hardware: Use only RX3i backplane revisions listed for the installed controller platform.
- PME version: The required PAC Machine Edition release depends on hardware generation, firmware, and configured feature.
- Remote I/O: PROFINET controller and scanner firmware must satisfy the published compatibility matrix.
- Legacy modules: Most Series 90-30 modules and expansion racks are supported subject to the RX3i system manual.
Application and retention setup
- Program organization: Up to 512 program blocks are supported, with a maximum block size of 128 KB.
- Reference tables: The controller provides discrete and analog reference-table resources for the application.
- Energy Pack: Retention depends on a connected and charged IC695ACC400 at power-down and power-up.
- USB transfer: Approved USB 2.0 removable devices can transfer controller applications.
Supported real-time control projects
- Machine control: IC695CPE302 can execute deterministic logic for industrial machines through the RX3i backplane and supported I/O.
- Process control: The controller supports real-time sequencing and coordination of process equipment.
- Material handling: RX3i communication and I/O services support conveyors and other coordinated material-handling systems.
- Operator and supervisory links: Ethernet and serial ports connect supported programming, HMI, and SCADA systems.