Features:
- Equipped with a 16-bit Arithmetic Logic Unit to execute arithmetic and logical processing with enhanced efficiency.
- Designed specifically for Expanded II functions and compatible with Model 60, 600, 6000, and Series Six Plus CPUs.
- Supports reliable operation in industrial environments with 5 to 95% non-condensing humidity and operating temperatures up to 60°C.
General Electric IC600CB524 Arithmetic Control Module serves as the arithmetic processing section within Series Six Plus PLC systems. The module incorporates a 16-bit Arithmetic Logic Unit that handles arithmetic and logical operations on data and address lines. Four internal hardware registers are included, consisting of continuity and buffer registers with 1-bit width and accumulate and preset registers with 16-bit width. General Electric IC600CB524 receives 5 VDC and 1.7 A from the CPU power supply and is intended for use with Model 60, 600, 6000, and Series Six Plus CPUs. Industrial users employ the module in control systems requiring Expanded II functions and dependable data processing.
In Series Six Plus architectures, General Electric IC600CB524 works together with the Logic Control module to generate timing and control signals. Communication between both modules is achieved through a ribbon cable connection, requiring adjacent installation in the CPU rack. The module must occupy slot 3 in the CPU rack immediately to the left of the Logic Control module. Expanded II configurations require Logic Memory modules IC600LX with at least 8K registers and either a 13-inch rack or a 19-inch CPU rack with a date code later than 10/87. Such requirements allow General Electric IC600CB524 to support more advanced processor capabilities.
General Electric IC600CB524 is commonly applied in legacy automation systems where reliable arithmetic processing remains essential. The design is based on the AM2903 expandable bipolar microprocessor slice, which simplifies multiplication, division, and other complex operations. Operating temperatures range from 0 to 60°C, while storage temperatures extend from 0 to 70°C. Relative humidity tolerance reaches 5 to 95% without condensation, making General Electric IC600CB524 suitable for demanding industrial environments. Process control, manufacturing equipment, and PLC-based automation systems can benefit from the computing functions provided by the module.
The IC600CB524 General Electric Arithmetic Control Module may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
General Electric IC600CB524 Arithmetic Control Module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
General Electric IC600CB524 Arithmetic Control Module Specs
General
- Manufacturer General Electric
- Model IC600CB524
- Condition New Original ready stock
- Product Family lC600CB500,IC600CB524K,IC600CB524L
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Self-diagnostic CHECK indicator: Real-time monitoring and indication of CPU core status anomalies via onboard logic.
- Power supply current protection: Overload protection against 5V DC 1.7A power supply from the main backplane.
- Industrial wide-temperature operation guarantee: Supports environments from 0 to 60 degrees Celsius, preventing operational distortion caused by extreme environments.
- Non-condensing moisture-proof design: Stable operation at 5% to 95% relative humidity, preventing short circuits caused by condensation on the circuit board.
- Series Six CPU Numerical Computation: Dedicated to accelerating complex mathematical algorithms in Model 60, 600, and 6000 systems.
- Traditional Manufacturing Line Logic Control: Provides high-speed Boolean logic data parsing for large-scale production lines in factory automation.
- Replacement of Spare Parts in Legacy Automation: Serves as an OEM spare part for mature control systems, reducing downtime risks on aging production lines.
- Multi-Module Joint System Synchronization: Links with logic control modules via ribbon cable connectors to generate system synchronization timing signals.
- Series Six original electrical standards: Strictly compliant with the system bus standards of GE's early classic Series Six programmable controllers.
- 16-bit microarchitecture compatibility specifications: Utilizes the classic 4-set AM2903 chipset, perfectly matching the 16-bit microprocessor instruction set.
- Traditional hardware and software backward compatibility: Fully compatible with the series' extended instruction set, ensuring uninterrupted upgrades to older factory systems.
- Industrial PCB Manufacturing Process: The circuit board adopts a standard 8.15 x 11-inch industrial size, conforming to the original equipment manufacturer's (OEM) rack slot specifications.