Features:
- Terminates eight 4 to 20 mA analog output loops on compression terminals.
- Uses the coated Size B construction supplied for CE applications.
- Accepts two processor cables for supported redundant-output arrangements.
This ordering configuration is the coated CE field termination assembly with eight analog output points. The Size B footprint and compression-terminal execution define its cabinet installation.
Channel signals arrive from the analog output processor through a dedicated system cable and are distributed to the corresponding field loops. The FTA is the physical boundary between cabinet electronics and modulating devices.
Before installation, confirm terminal numbering, loop polarity, cable assignment and mounting clearance. Variant substitution requires an approval and environmental review rather than a visual comparison.
Availability is confirmed after the complete FTA and cabinet configuration has been reviewed.
Verified resources for Honeywell MC-TAOX12 51304335-175:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Provides termination for control-valve positioners and other 4 to 20 mA final elements.
- Organizes analog output loop wiring in HPM and Experion PKS process-control cabinets.
- Supports replacement projects where the original coated CE Size B FTA must be retained.
- Occupies the documented Size B mounting space and presents compression terminals for eight loops.
- Connects to the analog output processor through the assigned Honeywell I/O cable.
- Terminal numbering and loop polarity must be reproduced exactly when conductors are transferred.
- Conformal coating protects the assembly surfaces in the specified MC hardware execution.
- External loop sources must be isolated before the field wiring or FTA cable is disconnected.
- Cabinet grounding and separation practices remain essential for stable analog signal routing.
- Works with the HPM analog output IOP and its documented cabinet cable arrangement.
- The automatic selector supports two processor connections in an approved redundant installation.
- CE, coating and Size B requirements must agree with the existing enclosure design.