Features:
- Four safe analog field terminations
- Active or passive current and voltage selection
- Interface to redundant SAI-0410 modules
FS-TSAI-0410 provides signal conversion and field termination for four SAI-0410 channels.
All channels share the converter-board selection, so mixed signal designs need explicit verification.
FTA accuracy, loop power and module scaling must be validated together.
The Honeywell FS-TSAI-0410 4-Channel Safe Analog Input FTA is available for quotation and technical support from Apter Power.
Verified resources for FS-TSAI-0410:
Signal Data:
- Analog channels: 4
- Module interface: Redundant SAI-0410 pair via SICC cable
- Signal selection: Active/passive voltage or current for all four channels
Use the documented FS-TSAI-0410 limits when calculating the complete field circuit.
Diagnostics:
- Converter-board range verification
- Loop-supply and polarity checks
- End-to-end scaling diagnostics
Resolve all FS-TSAI-0410 channel, wiring and system diagnostics before release to operation.
Compatibility:
- BSAI-04x analog conversion boards
- BSDIL-0426 loop-monitoring conversion
- One signal selection applies to all channels
Match FS-TSAI-0410 to the approved Safety Manager module, termination and field-device arrangement.
Installation Check:
- Verify converter board and range
- Check loop supply and polarity
- Calibrate all four channels
Complete and record the end-to-end functional test after installing FS-TSAI-0410.