Features:
- RS-485 Modbus Master or Slave communication
- CompactLogix L1 and distributed POINT I/O integration
- Up to 1000 data words and 30 configured commands
ProSoft ILX34-MBS485 is the RS-485 member of the ILX34-MBS family for SCADA and field-device connections.
ILX34-MBS485 stores configuration in the Logix ACD project and exposes diagnostic tags through its Add-On Instruction.
Install ILX34-MBS485 on an approved 1734 terminal base, then verify POINTBus current, external supply, RS-485 polarity, baud rate, parity, and command definitions.
The ProSoft ILX34-MBS485 Modbus Serial Module for CompactLogix L1 and POINT I/O Adapters is available for quotation, official documentation, and application-matching support from Apter Power.
ProSoft ILX34-MBS485 Modbus Serial Module for CompactLogix L1 and POINT I/O Adapters Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
ProSoft ILX34-MBS485 Modbus Serial Module for CompactLogix L1 and POINT I/O Adapters Specs
General
- ManufacturerProSoft Technology
- ModelILX34-MBS485
- ConditionNew Original ready stock
- Product FamilyPOINT I/O
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
RS-485 communication settings
- Serial Interface: RS-485.
- Modbus Modes: RTU or ASCII.
- Baud Rate: 2400, 4800, 9600, 19200, or 38400.
- Data Size: 7 or 8 bits.
Logix and POINT I/O integration
- Configuration Environment: RSLogix 5000 or Studio 5000.
- Power Supply: 10 to 28.8 VDC.
- POINTBus Current: 75 mA at 5 VDC.
- Module Location: 1734-TB/TBS or 1734-TOP/TOPS.
Data and connection limits
- Data Capacity: Up to 1000 words.
- Command Capacity: Up to 30 commands.
- Words per Command: Up to 36.
- Operating Temperature: 0 to 55 °C.