Ask our team:
  • Phone: +86 181 0690 9650
  • E-Mail info@apterpower.com
  • Lifecycle status

    Discontinued / Obsolete by OEM
    Migration support can help compare MVI69-MCM with the official MVI69E-MBS replacement.

MVI69-MCM

/ 4.9
1001 reviews | Need a Specific Revision?
The ProSoft MVI69-MCM module connects CompactLogix or MicroLogix 1769-LRP controllers to Modbus RTU and ASCII serial devices.
In Stock
Ships by Saturday, October 17
Fast Shipping Available
Get a quick price for MVI69-MCM
Quantity
*E-mail
Company
*Mobile
*Content
Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Technical specifications for MVI69-MCM

  • Manufacturer:
    ProSoft
  • Part Number:
    MVI69-MCM
  • Product Family:
    ProSoft
  • Product Type:
    Modbus Master/Slave Network Interface Module
  • Stock:
    1
  • Backplane:
    Single-slot 1769 compatible
  • Modbus Modes:
    RTU or ASCII
  • Application Ports:
    2 independently configurable ports
  • Serial Interfaces:
    RS-232, RS-485, or RS-422
  • Baud Rate:
    110 baud to 115.2 kbps
  • Data Size:
    7 or 8 bits
  • Stop Bits:
    1 or 2
  • Parity:
    None, Even, or Odd
  • Master Commands:
    Up to 100 per Master port
  • Slave Node Address:
    1 to 247
  • Current Load:
    800 mA maximum at 5 VDC
  • Operating Temperature:
    0 to 60 °C
  • Storage Temperature:
    -40 to 85 °C
  • Relative Humidity:
    5% to 95%, non-condensing
  • Application Port Isolation:
    500 V optical isolation from backplane
  • Configuration Port:
    RJ45; RS-232 only
  • Estimated shipping dimensions:
    Standard 1769 single-slot module
  • Tariff Code:
    8517623990
  • Country of origin:
    USA
  • Place of shipment:
    Xiamen,Fujian,China
By purchasing this item, you agree to the Terms & Conditions, ApterPower is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with ApterPower's 1-year warranty.

More Information

Overview Manuals Specifications Modbus Roles Controller Fit Configuration

Features:

  • Two independently configurable Modbus serial ports
  • RTU or ASCII Master and Slave operation
  • RS-232, RS-422, or RS-485 application interfaces
ProSoft MVI69-MCM adds two Modbus networks to supported CompactLogix and MicroLogix 1769-LRP control platforms.

MVI69-MCM provides up to 100 commands per Master port and exposes module data and communication status through the 1769 backplane.

For MVI69-MCM service or migration, check controller support, serial jumpers, node addressing, cable pinout, ladder logic, and the MVI69E-MBS migration guidance.

The ProSoft MVI69-MCM Modbus Master/Slave Network Interface Module may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
ProSoft MVI69-MCM Modbus Master/Slave Network Interface Module Manuals, Datasheets, Links Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
ProSoft MVI69-MCM Modbus Master/Slave Network Interface Module Specs

General

  • ManufacturerProSoft Technology
  • ModelMVI69-MCM
  • ConditionNew Original ready stock
  • Product FamilyMVI69 (CompactLogix)
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

Serial protocol operating roles

  • Modbus Modes: RTU or ASCII.
  • Application Ports: 2 independently configurable ports.
  • Serial Interfaces: RS-232, RS-485, or RS-422.
  • Baud Rate: 110 baud to 115.2 kbps.

Supported controller and backplane checks

  • Backplane: Single-slot 1769 compatible.
  • Master Commands: Up to 100 per Master port.
  • Slave Node Address: 1 to 247.
  • Application Port Isolation: 500 V optical isolation from backplane.

Setup and commissioning resources

  • Current Load: 800 mA maximum at 5 VDC.
  • Operating Temperature: 0 to 60 °C.
  • Storage Temperature: -40 to 85 °C.
  • Configuration Port: RJ45; RS-232 only.
Description
The MVI69-MCM is a legacy ProSoft MVI69 network interface module for connecting CompactLogix or MicroLogix 1769-LRP controllers to Modbus serial devices. Each application port can be configured independently as a Modbus Master or Slave. Both RTU and ASCII protocol modes are supported.

The MVI69-MCM provides RS-232, RS-485, or RS-422 application interfaces with communication rates from 110 baud to 115.2 kbps. A Master port supports up to 100 configured commands, while Slave addressing is selectable from 1 to 247. Module data and status are available to the controller through the 1769 backplane.

The MVI69-MCM is listed by ProSoft under legacy MVI69 products and has the official replacement MVI69E-MBS. Legacy Mode and controller compatibility must be verified before migration because the replacement is not universally interchangeable without review. Existing configuration, ladder logic, and serial wiring should be checked against the official migration note. The two application ports are optically isolated from the backplane and can use different serial standards and Modbus roles in the same installation.
Alternative Names
MVI69 MCM MVI69MCM ProSoft MVI69-MCM ProSoft Technology MVI69-MCM PST MVI69-MCM MVI69-MCM Modbus Master/Slave Network MVI69-MCM Datasheet MVI69-MCM Manual
Technical notes
MVI69-MCM is a Modbus Master/Slave Network Interface Module in the ProSoft MVI69 (CompactLogix) family. Use it only within the official controller, protocol, power, and environmental requirements.
Exceptional Service

Our Mission

  • 100% Satisfaction

    We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.
  • Trust Guaranteed

    Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our Warranty.
  • Expertise

    Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.

FAQS

The following is a list of questions commonly asked by our customers. Please contact us if you have a question about our process that is not answered below.
Can MVI69-MCM be used with my existing control system?
MVI69-MCM supports specified CompactLogix and MicroLogix 1500 LRP controllers, excluding the controller models listed in the official datasheet.
How should MVI69-MCM be configured?
MVI69-MCM: use ProSoft Configuration Builder and the supplied ladder example, then configure each serial port independently as Master or Slave.
What should I check if MVI69-MCM is not communicating?
MVI69-MCM: check RS-232/RS-485/RS-422 jumper selection, baud rate, parity, node address, command status, cable pinout, and port activity LEDs.
Which installation limits must be checked for MVI69-MCM?
MVI69-MCM: verify 800 mA at 5 VDC backplane load, 0 to 60 °C operation, and the 100-command limit per Master port.
What is the lifecycle or replacement status of MVI69-MCM?
MVI69-MCM: Discontinued / Obsolete by OEM. The official ProSoft legacy replacement is MVI69E-MBS; verify Legacy Mode and application compatibility before migration.
Where can I obtain official documentation for MVI69-MCM?
MVI69-MCM official ProSoft datasheet is the first item in the Manuals tab; follow the model-specific manual for commissioning.
What information is needed to quote MVI69-MCM?
MVI69-MCM enquiries should include quantity, installed controller, firmware or hardware revision, application protocol, and delivery destination.

Product Browsing History