Features:
- Sixteen relay digital outputs for SIMATIC S7-1200 expansion
- 2 A rated switching capacity
- Four output groups for higher-density switching
The order configuration identifies an SM 1222 signal module with sixteen relay outputs arranged in four groups.
Use the module where a SIMATIC S7-1200 project requires additional relay points for compatible AC or DC industrial loads.
The Siemens 6ES7222-1HH32-0XB0 SM 1222 Digital Output Module is listed by Siemens as a PM300 Active Product, with product phase-out stated from 1 November 2026. Availability from Apter Power is subject to quotation and stock confirmation.
Siemens 6ES7222-1HH32-0XB0 SM 1222 Digital Output Module Manuals, Datasheets, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Siemens 6ES7222-1HH32-0XB0 SM 1222 Digital Output Module Specs
General
- ManufacturerSiemens
- Model6ES7222-1HH32-0XB0
- ConditionNew Original ready stock
- Product FamilySIMATIC S7-1200 SM 1222 Digital Output Modules
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Relay Outputs:
- 16 relay digital outputs
- 2 A rated output current
- 5-30 V DC rated load voltage
- 5-250 V AC rated load voltage
Electrical Data:
- 20.4-28.8 V DC permissible supply range
- 135 mA maximum backplane-bus current
- 8.5 W typical power loss
- Four output groups
Installation Notes:
- 45 x 100 x 75 mm module dimensions
- IP20 degree of protection
- 500 m maximum shielded cable length
- Check simultaneous-output limits at elevated temperature