Features:
- Eight 24 V DC sink/source digital inputs
- Eight relay digital outputs rated at 2 A
- Combined input and output expansion in one SM 1223 module
The order configuration identifies an SM 1223 signal module with eight digital inputs and eight relay outputs.
Use the module where a SIMATIC S7-1200 project requires balanced digital field-signal acquisition and relay switching.
The Siemens 6ES7223-1PH32-0XB0 SM 1223 Digital I/O Module is listed by Siemens as a PM300 Active Product, with product phase-out stated from 1 November 2026. Availability from Apter Power is subject to quotation and stock confirmation.
Siemens 6ES7223-1PH32-0XB0 SM 1223 Digital I/O Module Manuals, Datasheets, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Siemens 6ES7223-1PH32-0XB0 SM 1223 Digital I/O Module Specs
General
- ManufacturerSiemens
- Model6ES7223-1PH32-0XB0
- ConditionNew Original ready stock
- Product FamilySIMATIC S7-1200 SM 1223 Digital I/O Modules
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Digital Channels:
- 8 digital inputs
- 24 V DC sink/source input design
- 8 relay digital outputs
- Inputs and outputs arranged in groups of two
Relay Data:
- 2 A rated output current
- 5-30 V DC rated load voltage
- 5-250 V AC rated load voltage
- Relay-contact switching duty must be verified
Installation Notes:
- 45 x 100 x 75 mm module dimensions
- IP20 degree of protection
- 20.4-28.8 V DC permissible supply range
- Confirm input wiring and output loads before commissioning