Features:
- Eight 24 V DC input switches
- Designed for CPU 1211 and CPU 1212
- Compact input simulation for functional checks
The Siemens 6ES7274-1XF30-0XA0 is a SIMATIC S7-1200 SIM 1274 simulator module intended for CPU 1211 and CPU 1212 controllers. It provides eight switches for simulating 24 V DC digital input states. The simulator supports functional checks of controller input logic during commissioning and service work. Its order configuration is specifically associated with the stated CPU sizes and input arrangement.
The module contains no digital outputs, analog inputs or analog outputs. Its function is limited to the eight simulated input signals documented by Siemens. The compact device measures 43 x 35 x 23 mm and has an IP20 degree of protection. The simulator should be used within the electrical and mechanical limits of the compatible controller.
Select this version only after confirming that the target controller is a supported CPU 1211 or CPU 1212. The switch positions can be used to exercise program conditions without installing the final field-input wiring. It does not replace the external sensors, protective devices or validation required for the completed machine. Installation and removal should follow the S7-1200 hardware instructions and normal power-isolation practices.
For CPU 1211 and CPU 1212 test setups using the 6ES7274-1XF30-0XA0, Apter Power can provide quotation support, official documentation and compatibility checks. Siemens states product phase-out from 1 November 2026; supply is verified at the time of inquiry.
Siemens 6ES7274-1XF30-0XA0 SIM 1274 Simulator Module Manuals, Datasheets, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Siemens 6ES7274-1XF30-0XA0 SIM 1274 Simulator Module Specs
General
- ManufacturerSiemens
- Model6ES7274-1XF30-0XA0
- ConditionNew Original ready stock
- Product FamilySIMATIC S7-1200 SIM 1274 Simulator Modules
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Simulator Inputs:
- Eight digital input switches
- 24 V DC rated value
- No digital outputs
- No analog channels
CPU Compatibility:
- SIMATIC S7-1200 CPU 1211
- SIMATIC S7-1200 CPU 1212
- Input simulation during commissioning
- Confirm exact CPU before installation
Installation Notes:
- 43 x 35 x 23 mm dimensions
- IP20 degree of protection
- Use only with compatible input points
- Remove power before fitting or removal