- Single-axis Kinetix 350 drive for a 480 V-class Logix motion architecture
- EtherNet/IP motion control with the documented CIP Motion and CIP Sync services
- Safe Torque Off connection for integration into a validated machine-safety system
2097-V34PR3-LM provides one EtherNet/IP-controlled motion axis and must be selected with a compatible controller, motor, feedback device, and cable set.
The catalog number belongs to the 480 V-class Kinetix 350 range, so supply, motor winding, protection, and grounding must match the published installation conditions.
Preserve the Logix project and firmware records, then verify network settings, regeneration, cooling, cable routing, and Safe Torque Off validation before commissioning.
Availability, condition, price, and shipping time for 2097-V34PR3-LM are confirmed during quotation.
Allen-Bradley 2097-V34PR3-LM Kinetix 350 Servo Drive Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Configure the catalog number within a compatible Logix EtherNet/IP motion project
- Match the controller, Studio 5000 environment, and drive firmware to the installed hardware
- Validate motor polarity, feedback direction, axis scaling, and Safe Torque Off operation before use
- Match motor power, motor feedback, brake, and I/O cables to the selected motor and drive interfaces
- Maintain the documented separation, shielding, bonding, and grounding practices for power and signal wiring
- Verify connector kits, cable lengths, bend radius, and enclosure entry positions before replacement
- 2198-C4007-ERS is identified by Rockwell Automation as the engineering replacement
- Migration requires review of the Logix configuration, motor-feedback hardware, cables, panel layout, and safety design
- Record the original axis settings, firmware, wiring, and acceptance results before removing the installed drive
- Single-axis indexing and coordinated motion in compatible 480 V-class machinery
- Logix-controlled servo axes using EtherNet/IP with CIP Motion and CIP Sync
- Machine sections requiring the documented Safe Torque Off interface