Features:
- Compact rating: 4.2 A output remains in the 7.2 cm Frame A enclosure
- Passive cooling: convection serves this 1.5 kW drive
- External adapter rule: communication adapters use an external DSI kit
The 4.2 A rating stays within the compact Frame A mechanical envelope while increasing the supported motor duty to 1.5 kW / 2 HP.
The serial port supports useful network options, but plug-in communication adapters are not mounted directly on the 4M housing.
Retrofit planning therefore joins convection clearance, serial integration, and stopping-energy decisions before parameter transfer begins.
Apter Power can review 22F-D4P2N103 Frame A fit, DSI requirements, official records, and quotation scope.
22F-D4P2N103 Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Width: retain the documented 72 mm Frame A body
- Cooling: preserve the upright convection path and published clearances
- Mounting: verify panel or supported DIN-rail arrangement from official instructions
- Integral port: use RS485 (DSI) for supported serial programming or control
- Adapter boundary: mount communication adapters through the external DSI kit
- Record: preserve address, format, loss action, and controller mapping
- N103 code: this configuration has no brake IGBT
- Load inertia: review regenerated energy before specifying rapid deceleration
- Stop test: prove the approved ramp or coast behavior under actual load
- Compact machinery: control a matched 1.5 kW / 2 HP motor
- Serial networks: use documented Modbus RTU or DSI arrangements
- Panel retrofits: apply feed-through wiring with Frame A convection clearances