Features:
- Dual-port endpoint: embedded switch supports ring, linear, and star layouts
- SVGA operator area: 10.4-inch 4:3 resistive touch display
- Remote option: embedded ViewPoint license supports one browser client
This exact catalog code pairs the largest 4:3 Standard display with the 22 dual-port network option.
The embedded switch supports network continuity choices that the single-port 10-inch companion cannot provide.
Local and remote access should be governed by the same application, security, and commissioning record.
For 2711P-T10C22D8S, Apter Power can assist with official-data confirmation, quotation, and sourcing coordination.
Verified resources for 2711P-T10C22D8S:
Important Notice: Confirm the required firmware, application files, cables, accessories, and documentation in the quotation before ordering.
- Shared identity: both Ethernet jacks belong to one terminal and one controller communication path.
- DLR use: connect the ports into the documented ring only after confirming the site topology.
- Linear use: recognize that a terminal or cable outage can interrupt downstream communication.
- Star use: leave the second port unused when the design treats the HMI as a single endpoint.
- ViewPoint license: plan one browser client connection to the running ME application.
- Access policy: decide whether the remote user can only view or may control the HMI.
- Desktop boundary: enable Windows desktop access only for an approved maintenance task.
- Session test: verify the browser path and operator permissions without bypassing local control procedures.
- Indoor rating: use the terminal within its marked Type and IP enclosure conditions.
- Cutout control: use the official 10.4-inch template rather than a neighboring display-size drawing.
- Lever engagement: install every required mounting lever and tighten in the specified sequence.
- Final inspection: verify gasket seating, clearances, wiring strain, and door closure.
- Ring-connected operator station: add a 10.4-inch local HMI to supported DLR machine architecture.
- Alarm and status display: present ME process graphics on a large 4:3 touch interface.
- Supported controller interface: exchange operator data with one ControlLogix 5570 or CompactLogix 5370 controller.