- 2 m RS-232 communication cable
- 8-pin mini-DIN connectors at both ends
- Supports documented MicroLogix and AIC+ connections
1761-CBL-HM02 is an Allen-Bradley communication cable designed for MicroLogix RS-232 connections.
It links compatible MicroLogix controllers to the 8-pin mini-DIN port of an AIC+ interface converter and supports the documented handheld-programmer connection.
Before installation or replacement, verify Series C identification, both endpoint connectors, the AIC+ selection-switch position, serial settings, and any hardware-handshaking requirement.
Availability, condition, price, and shipping time for 1761-CBL-HM02 are confirmed during quotation.
Allen-Bradley 1761-CBL-HM02 2 m RS-232 Mini-DIN Communication Cable Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Compatible controller families include MicroLogix 1000, 1200, and 1500
- Use only with equipment that provides the documented 8-pin mini-DIN RS-232 interface
- Confirm the complete 1761-CBL-HM02 catalog number and cable series before replacement
- Both cable ends use 8-pin mini-DIN RS-232 connectors
- The controller-to-AIC+ arrangement does not require an external supply
- The cable also supports the documented MicroLogix handheld-programmer link
- Set the AIC+ switch to Cable for the controller connection
- Use Series B or later when hardware handshaking is required
- Match the serial communication settings at both connected devices
- MicroLogix 1000 connection to a compatible hand-held programmer
- MicroLogix 1000, 1200, or 1500 processor connection to an AIC+ 8-pin mini-DIN RS-232 port
- AIC+ port 2 connection to another compatible AIC+ 8-pin mini-DIN RS-232 port