Features:
- Channel architecture: Eight independently isolated digital outputs
- Output range: 2 to 60 VDC at up to 1 A per channel
- Terminal key: B5
This ordering configuration is the KJ3208X1-BA2 isolated digital output card for DeltaV M-series traditional I/O.
It switches eight separate DC loads and supports discrete, momentary, and continuous-pulse output operation.
Confirm B5 terminal-block keying, load ratings, and complete power isolation before installation or replacement.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson KJ3208X1-BA2:
- Eight-point switching of separately isolated DC field loads.
- Momentary or continuous-pulse commands generated by DeltaV control logic.
- M-series installations that require an isolated 2 to 60 VDC output interface.
- The card provides eight independently isolated digital-output channels.
- Each output supports 2 to 60 VDC at up to 1 A.
- Discrete, momentary, and continuous-pulse operating modes are documented.
- Every output channel is isolated from the DeltaV system and from the other channels.
- Maximum off-state leakage is specified as 1.2 mA.
- Keep each connected DC load within the documented voltage and current ratings.
- The card requires 12 VDC at 150 mA from the DeltaV LocalBus.
- Use a terminal block keyed to position B5 for KJ3208X1-BA2.
- Remove field and system power before insertion, removal, or terminal work.