Features:
- Provides one intrinsically safe discrete-output channel for a compatible field load.
- Implements the 45 mA IS discrete-output variant within the CHARM family.
- Combines per-channel electronic marshalling with integrated diagnostics for supported output circuits.
The current ordering configuration is SE4306T01, the DeltaV Intrinsically Safe 45 mA Discrete Output CHARM documented by Emerson for DeltaV IS Electronic Marshalling.
SE4306T01 is used in Intrinsically safe on/off actuation where a 45 mA discrete output is appropriate. Its system role and configuration limits must remain aligned with the official specification.
Before commissioning SE4306T01, verify the installed assembly, project wiring, power, software and environmental conditions that apply to this exact part number.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson SE4306T01:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Intrinsically safe on/off actuation where a 45 mA discrete output is appropriate.
- Electronic-marshalling cabinets using the approved DeltaV IS CHARM baseplate.
- Replacement of one IS output channel without changing unrelated CHARM signal types.
- Apply the channel only within the approved intrinsic-safety loop design.
- Match the CHARM with the designated IS baseplate and terminal block.
- Follow the hazardous-area isolation procedure before field work.
- Confirm load current before assigning the output to SE4306T01.
- Use DeltaV diagnostics to identify channel or field-circuit faults.
- Keep the separation hardware required by the IS baseplate assembly.
- Use the product only within the environmental limits of the approved IS assembly.
- Maintain the enclosure conditions stated for DeltaV electronic marshalling.
- Apply certifications according to the product label and installation manual.