Features:
- Passive FSTN monochrome display designed for color-independent alarms and operator prompts
- Basic View memory provides 16 MB flash and 16 MB DRAM for the downloaded visualization target
- One RS-232/485 channel and 10/100 Ethernet cover the compact panel’s controller and download paths
The passive monochrome display prioritizes simple status, alarm, and command screens where color coding is not required by the machine project.
This basic View hardware uses the supported backup procedure to retain settings that would otherwise be lost after a power interruption.
The single serial channel and Ethernet connection suit compact controller links without the additional expansion interfaces of loaded models.
The General Electric IC754VSB06MTD QuickPanel View is available for quotation assistance and access to applicable official manufacturer documentation through Apter Power.
General Electric IC754VSB06MTD QuickPanel View Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
IC754VSB06MTD monochrome operating characteristics
- Display method: IC754VSB06MTD presents a 320 x 240 passive FSTN image, so project graphics must remain clear without color coding.
- Touch entry: The resistive surface supports local selection and data input and should be recalibrated when targets no longer align.
- Application capacity: The basic terminal allocates 16 MB flash and 16 MB DRAM to its View project and runtime resources.
- Backlight condition: A dim monochrome image should be evaluated against the documented CCFL service-life behavior before replacing the full terminal.
IC754VSB06MTD compact communication paths
- Serial controller link: Use the single EIA-232C/EIA-485 channel at the mode and baud rate stored in the machine project.
- Ethernet service: The RJ45 10/100Base-T connection supports the configured network driver and project-transfer path.
- Port limitation: Because IC754VSB06MTD does not provide the loaded model’s second serial and USB/CompactFlash set, peripheral expectations must match the basic hardware.
- Address record: Save the serial node settings and Ethernet identity together before exchanging the standard-bezel terminal.
IC754VSB06MTD monochrome panel conditions
- Ambient envelope: Operate IC754VSB06MTD from -10 to 60 °C within 10 to 85% non-condensing humidity.
- Front protection: Seat the supplied gasket in a comparably rated enclosure to preserve NEMA 4/4X/12 protection at the standard bezel.
- Contrast stability: Review screen legibility at the installed temperature and lighting because the passive monochrome panel responds differently from a color TFT.
- Cold start: Do not energize the terminal until moisture from storage or a rapid temperature transition has dissipated.
IC754VSB06MTD suitable operator projects
- Utility equipment: IC754VSB06MTD suits compact pump, compressor, or utility panels whose states are conveyed with text and symbols.
- Simple sequence stations: The monochrome View can present step status, interlocks, and local commands for a controller-led machine sequence.
- Legacy Basic View replacement: It preserves a standard-bezel 6-inch installation that already uses the basic memory and single serial architecture.
- Space-limited network panel: Ethernet plus one configurable serial channel supports small enclosures with straightforward communication needs.