Features:
- Implements the H/I RS-422/485 communication configuration.
- Connects the documented serial interface to the Safety Manager Central Part.
- Maps to the manufacturer-listed 10024/H/I pin-compatible successor.
The order code 10014/H/I identifies the balanced serial variant within the Honeywell 10014 COM family.
It carries an engineered RS-422/485 data path whose topology and settings are part of the validated safety system.
Record polarity, termination, node parameters, shielding, and software level before any replacement activity.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Honeywell 10014/H/I:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Maintain a Central Part serial channel originally designed around the H/I interface.
- Support differential communication over the established RS-422/485 cabinet or field network.
- Execute a documented migration to 10024/H/I after configuration and validation review.
- The 10014/H/I module provides the documented RS-422/485 serial interface for the Safety Manager system.
- Differential polarity, node termination, and cable shielding must remain consistent across the connected network.
- Reference bonding and connector wiring should follow the approved Honeywell FSC system drawings.
- Confirm the complete 10014/H/I identification and installed Safety Manager function before replacement.
- Retain port settings, node addresses, and protocol records when integrating the replacement module.
- Run communication diagnostics and the site acceptance test before returning the channel to service.
- Keep the module within the host Safety Manager system's specified temperature, humidity, contamination, and cabinet limits.
- Maintain cabinet airflow and avoid disturbing neighboring Central Part wiring during replacement.
- Inspect connectors and termination hardware for corrosion or mechanical damage before energizing.