Features:
- A 1.5 kW StateLine inverter operates from the 3/PE 320–528 V AC mains range.
- PROFINET and integrated local I/O connect the decentralized axis to the machine controller.
- IP65 / NEMA Type 4 construction supports near-motor mounting in suitable industrial locations.
The supplied code identifies the cold-brake, two-hybrid-plug, service-switch execution with external-resistor provision.
Power electronics generate controlled motor voltage and frequency while the network exchanges setpoints, status and diagnostics.
Verify connector coding, motor nameplate, brake voltage, memory module and PROFINET identity before restoring the axis configuration.
Apter Power can support exact-model configuration review and quotation for Lenze E84DSMCC1524R2SNCE.
Verified resources for Lenze E84DSMCC1524R2SNCE:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Modular conveyors can distribute drive electronics along the line and connect each axis over PROFINET.
- Packaging cells can use local I/O to shorten sensor and actuator wiring around a driven station.
- Handling equipment with a motor brake can use the cold-brake control when the exact brake data matches.
- The order code defines a 1.5 kW 8400 protec StateLine unit for decentralized 400/500 V drive applications.
- This execution has no integrated safety function, so the machine safety concept must be provided by external equipment.
- Dynamic braking requires the specified external resistor arrangement and correct thermal protection for the duty cycle.
- Two hybrid mains plugs support line distribution through the decentralized drive installation when correctly coded.
- Hybrid connectors, local I/O and a service switch simplify conveyor and modular-machine installation near the motor.
- The connector set, brake execution, motor data, network name and absence of integrated safety must be verified before exchange.
- Motor-adjacent 1.5 kW power conversion reduces the need for long shielded motor cables and central drive hardware.
- StateLine functionality provides a streamlined control scope for repeatable conveyor and modular-machine axes.
- The 400/500 V decentralized architecture simplifies distribution of drive power across suitable machine sections.