Features:
- High-density control of 64 binary field outputs.
- Dual 50-pin MIL interfaces for organized signal distribution.
- Supports direct operation of relays, valves, contactors, and indicators.
Industrial plants often require many switching commands to be distributed from a controller to field equipment. Yokogawa NFDV561-P00 S2 provides 64 output points within a single hardware module. Each channel supplies a 24 V DC digital signal for discrete control duties. The module can coordinate numerous binary actuators without requiring a separate module for every small group of devices. Such density supports efficient cabinet layouts in large automation systems.
Output commands may control equipment involved in machine sequencing, process routing, alarm signaling, and utility operation. Yokogawa NFDV561-P00 S2 can switch relays, solenoid valves, contactors, and indicator circuits according to controller logic. STARDOM FCN and CENTUM VP applications can use the module as part of an integrated control architecture. Fast and organized command distribution supports repeatable equipment operation. Properly assigned channels also simplify maintenance and troubleshooting.
Reliable operation depends on careful attention to load conditions and cable installation. Yokogawa NFDV561-P00 S2 must not exceed 100 mA per output point or 26.4 V. Surge suppression is necessary when switching inductive devices that can generate reverse voltage. Shielded cables should be connected to the specified shield ground screws and grounding bar. Following the wiring and grounding requirements helps protect the module circuitry and maintain stable digital output performance.
The NFDV561-P00 S2 Yokogawa Digital Output Module may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Yokogawa NFDV561-P00 S2 Digital Output Module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Yokogawa NFDV561-P00 S2 Digital Output Module Specs
General
- Manufacturer Yokogawa
- Model NFDV561-P00 S2
- Condition New Original ready stock
- Product Family NFAI141-S00 S2,NFAP135-S00 S2,NFAR181-S00 S2
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Terminal Wiring: Uses dedicated pressure terminals for dual-redundant or single-channel cable connections.
- System Bus: Directly connected to the CENTUM VP control station via V net/IP bus.
- Power Injection: Supports external 24V DC drive power input for field devices.
- Status Indication: LEDs on the front panel indicate the high and low level status of the channel in real time.
- Electrical Safety: Complies with IEC 61010-1 standard and features comprehensive protection against electric shock.
- Explosion-proof Certification: Certified for safe operation in explosion-proof areas by mainstream industrial standards such as FM and ATEX.
- Immunity Performance: Passes EMC high-level electromagnetic compatibility testing in industrial environments.
- Environmental Compliance: The entire manufacturing process complies with RoHS green environmental protection and lead-free requirements.
- Valve Control: Used for opening and closing pneumatic and solenoid valves in chemical plant areas.
- Pump Start/Stop: Connects to the Motor Control Center (MCC) to achieve remote pump and valve interlocking start.
- Audible and Visual Alarms: Serves as the trigger source for outdoor alarm lights and buzzers in the central control room.
- System Linkage: Transmits dry contact signals to third-party independent safety instrumented systems (SIS).