Features:
- Precision digital and analog signal processing for industrial automation system architectures
- High-speed data acquisition and control command distribution across the system backplane
- Designed for compatibility with redundant module configurations to enhance overall system availability
The ABB UFC912A101 3BHE039426R0101 Protection Board continuously processes incoming sensor signals and distributes control commands through the system backplane to support steady-state operation of all connected monitors and I/O modules. Seamless signal transfer is standard with the UFC912A101; however, deploying an optional redundant module configuration allows seamless switchover to a backup unit in the event of a primary circuit failure. The UFC912A101 3BHE039426R0101 has made improvements in signal processing stability and noise immunity over previous circuit plate designs in addition to incorporating enhanced communication capability within the control rack.
The UFC912A101 3BHE039426R0101 provides essential interface functions common to the entire control path, and is a critical component of the automation loop, directly affecting the proper, normal operation of the overall monitoring and control system. One or two UFC912A101 modules are utilized per control station depending on the desired redundancy level. The UFC912A101 3BHE039426R0101 occupies a compact slot position in the rack and is typically installed in the designated controller or interface slots for optimal signal routing and minimal wiring complexity.
For dual redundant control applications, the ABB automation system requires a second UFC912A101 3BHE039426R0101 module installed in the redundant slot. In addition to standard single-module operation, the redundant configuration also performs automatic switchover. The dual-module configuration executes failover using the internal diagnostic circuitry specified in the module options. Using this method, the redundant system continually monitors the health of both UFC912A101 units.
The UFC912A101 3BHE039426R0101 ABB Protection Board may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
ABB UFC912A101 3BHE039426R0101 Protection Board Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
ABB UFC912A101 3BHE039426R0101 Protection Board Specs
General
- Manufacturer ABB
- Model UFC912A101 3BHE039426R0101
- Condition New Original ready stock
- Product Family UFC039A01 3EHL402791R0001,UFC092BE01 HIEE300910R0001
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Driving high-current physical loads like industrial actuators, relays, contactors, and solenoid valves.
- Serving as a protective galvanic barrier between microelectronic control logic and external field devices.
- Delivering mixed-topology industrial automation requiring both binary switching and continuous process control.
- Managing high-speed emergency shutdown loops and critical process interlocking systems.
- Operates on a standard industrial 24V DC auxiliary power supply.
- Features 8 physical channels that can be independently configured via software.
- Allows flexible mapping of individual channels to function as Digital Outputs (DO) or Analog Outputs (AO).
- Processes analog signal types utilizing a 12-bit conversion resolution for precise control.
- Integrates directly into ABB control architectures using standard IEC 61131-3 function blocks.
- Provides 1500V AC galvanic isolation to protect upstream system racks from field voltage spikes.
- Supports high-current demands with a capacity of up to 2A per channel.
- Executes internal signal processing at a rapid 10ms hardware update rate.
- Withstands extreme environments with an operational temperature range of -20°C to +60°C.
- Delivers live status monitoring, reporting channel faults and external power losses directly to the master controller.